I will get one if you can get ahold of the guy. Just try to figure out the total cost and how to apply it.
I will get one if you can get ahold of the guy. Just try to figure out the total cost and how to apply it.
I would be in for one litre if a few other people want to split the shipping to the USA.
I wonder what the shipping would be to the USA?
I have been contacted by Joe. He said that he had a phone call from someone in the States to his cell phone and the reception at his end was awful. He doesn't know who it was from. Ifth eperson concerned could contact him on his landline (cheaper anyway) he will answer any queries.
He stated separetly that someone from Bayou Bullet Co contacted him.
He is keen to do business in the States and anyone who is interested should contact him or give me your contact details so I can pass them on.
I am not affiliated with Joe or J&M, I just have ended up being a contact after getting involved in this thread.
I have been using bullets with his coatings for many years and he turns out a first rate product, which is totally safe to use, so I don't have any qualms about referring him or helping who I can. Mick.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
Four Fingers,
In post # 174 you gave us a link to his phone number.
Which phone number is his landline?
Is it the 9004 number or the 9304 number?
PM me his landline number.
Thanks,
WCK
+61 2 6556 9004 is the landline. Good luck.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
Four Fingers,
When is the best time of the day to call Joe?
This would be Eastern Daylight Time.
Thanks,
WCK
Between 9-5 Monday to Friday I would imagine. Eastern Standard time (Sydney/Vladivostok time).
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
I would be very keen to get some of this ''paint'' and try it.I think if it does what it's said it does we could see the end of grooved boolits and smooth sided aka jacketed boolits could be the future.I would really like to shoot a .303 cartridge loaded with a nice red coloured dry lubed 180-200grn .316dia boolit or green 150grn .268 6.5x55 number. Pat
A lot of occasional black powder cowboy shooters (we have a few BP only shoots, probably the same everywhere) that use the coated bullets with BP. They generally use an overpowder wad and a grease cookie. The funny thing is I tried to pan lube a bunch using Pearl Lube from Darstardly Dan (Big Lube moulds). No way Jose' would it stick to the bullets! I ended up having to use a cookie. I have never tried running them through a lube sizer.
Interesting stuff.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
Has anybody tried a metallic paint? For example rustoleum silver metallic paint used to paint pipes and tanks? I have some at home I need to dig out of storage and try sometime.
youwouldn't want to use paint. the stuff will more than likely goo up the rifling and act like a leaded up barrel. a coating that that cross links.... aka... one that will not wet back out with solvent is what is needed if you want to try it.
anyone moving forward on this? i would like to give it a try but kinda don't see how this works since all my heads need to be sized. i wonder if they use "special" molds that are slighty undersized compared to normal molds.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
Yesterday I made my first painted boolits. The paint is from Italy and here is the link - http://www.inver.com/en/.
Im very satisfied from the result. Last year I shot only with painted boolits (http://www.ares-gun.sk/?lang=english and http://ammo.dynamic-arms.com/)- no lead in the barrel, excelent accuracy and...5 % less powder compared with FMJ.
I made three different types 9x19 (Lee 124 Grain Tumble Lube Truncated Cone and 125 Grain 2 Ogive Radius, RCBS 147 Grain Flat Nose) and one .40 (Lee 175 Grain Truncated Cone)
Here is my result:
It's easy and very cheap. The needed paint for one boolit costs $0.002!!! Yes, for $0,01 you can paint five boolits. I buy 1 kilo for $5, and with this quantity I can paint approximatealy 3K boolits.
Best regards from Bulgaria, Eastern Europe
Do you paint them then size them or size then paint?
Thats interesting plamenti, but what is the exact product? The link just opened up a site.
After learning about the dangers of using teflon at high temps and pressures, I'd be wanting to make sure the paint was free of it before I used it.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
First paint, then size with Lee boolits sizer dies. I "bake" the boolits in one old stove - 30 minutes, 180 degree Celsius.
This is my Powder Coating Gun - http://www.eastwood.com/original-hot...ing-gun-1.html
Here is my whole equipment:
Four Fingers of Death, I'm sorry, my mistake - you can use any kind of Epoxypolyester powder paint. Here - http://www.inver.com/en/powder_coati...yester/78/788/ . Here is the site of the distributor in my country Bulgaria - http://plasto.bg/articledetails.php?ArticleID=25 .
I don't know what is the equivalent of this Epoxypolyester powder paint in US.
I use withe paint, becouse is the cheapest. The collor is not important for the quality. With the other links I just want to show what kind ot boolits you can make. I don't hear about any dangers of using polimer painted boolits and I can't say anything.
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
Anyone seen/tried the bear creek moly coated bullets? Searching that name doesnt bring up much on the site and doesnt seem to have been brought up in this thread.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |