Got my new Rock Chucker today, mounted it on the bench next to the Dillion 550. Put the .223 dies in to do some primer popping and sizing, got the third case stuck. Switched to the new Hornady dies I purchased for the 30-06 and bent the rod on the sizer as well as the primer pin.
Dangit, so much for the weekends ammo.
If it ain't one thing, it's another...
Longrange,
You can pull the brass out of the die. Do a search and you should find instructions. It's pretty easy.
John
That happens now in again to remind us to be happy when it goes smooth! I feel your pain!!!
NRA LIFER .. "THE CAST BULLET HANDLOADER IS THE ONLY ONE THAT REALLY MAKES ANY OF HIS AMMUNITION. OTHERS MEARLY ASSEMBLE IT". -E.H. HARRISON
----------------------
"Those who hammer their guns into plows will plow for those who do not."
Thomas Jefferson
------
"Government is not a solution to our problem, government is the problem."
-- Ronald Reagan
It has been a while since I had to pull a stuck case, but IIRC it takes a #3 drill, a 1/4-28 tap, bolt, washer, and a 9/16" socket.
Now I will probably get a stuck case the naext time I resize anything....
Robert
A good excuse to buy the Lee universal decapping die. I removed the decapping pins from my sizing dies. I like it better that way.
Dutch
"The future ain't what it used to be".
-Yogi Berra.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote