Just thought I would pass along that there is an article on making paper patch swage die in the current issue of Machinist Workshop.
It is the non press type die, but the info should cross to press mounted dies.
Just thought I would pass along that there is an article on making paper patch swage die in the current issue of Machinist Workshop.
It is the non press type die, but the info should cross to press mounted dies.
I saw it but I just scanned over it. I need to go back and read it from the beginning to the end.
I have not read it through either, I just happened to see it and bought the magazine asn there are a couple of articles of interest in it.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |