Lee PrecisionStainLess Steel MediaRotoMetals2MidSouth Shooters Supply
Titan ReloadingADvertise hereInline FabricationGraf & Sons

Page 8 of 8 FirstFirst 12345678
Results 141 to 143 of 143

Thread: Revolver shot loads that WORK!

  1. #141
    Boolit Master
    Join Date
    Feb 2010
    Quote Originally Posted by Forrest r View Post
    Never made anything other than loaded 11 #5-shot pellets in a speer 35cal blue capsule and loaded them in 357 cases. Used them at the skeet range with a 6" bbl'd 586. Man I sucked!!! Could only break 6 to 8 birds out of 25 on the skeet range. I could run 25's with a 20ga and a 410. Darn 586 played hell with me, I called it 50/50.

    50% me and 50% the 1000fps load. Tried pushing the speer capsules harder and they blew out. I shot countless 1000's of 1200fps loads on the skeet and trap fields. Just couln't get the leads right with the 1000fps load of the 357/speer shot capsules.
    I have shot the Speer capsules hard .But did it with the 38spl case and shot in a 357mag, Other wise they would not fit in a 38spl.and shot some birds with them. I use 7 1/2 shot in them.it work about 7 yards.
    Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA

  2. #142
    Cast Boolits Owner

    No_1's Avatar
    Join Date
    Mar 2005
    N.E. Florida
    Quote Originally Posted by Von Dingo View Post
    Why this thread is not a sticky eludes me, had to search pretty hard for this one...
    Stuck - excellent thread!
    "Things always get better once thought, time, and money are applied in the correct amounts at the correct time"
    - No_1 -

    "The only way to deal with an unfree world is to become so absolutely free
    that your very existence is an act of rebellion."
    - Albert Camus -

  3. #143
    Boolit Master

    rockrat's Avatar
    Join Date
    Aug 2005
    I have been playing with some loads for my 38 special snubby. I use 357 max brass, trimmed so the end is about .010" inside the cylinder, size in a 357 mag die, run thru a 38 special seater die to set the bit of a should back. I then load with 2.2 gr bullseye, a wad cut from cardboard egg carton, then fill with "ancini de pepe" pasta (maybe 1/16" in dia.) then another card wad on top and make a small crimp using a 7mm br seating die with the bullet nose stem removed.
    I need to anneal like GP100man had posted years ago as I get springback on the case neck when I form it, and they are difficult to chamber.
    However, they work up close. I use the pasta as I sometimes shoot in the gravel in the flower bed next to the house and don't care for any ricochets. Figure the pasta just disintigrates. Wife says snakes out in the field or 75' or so away from the house are fine, but next to the house, it is verboten for them to be here. They have taken to hibernating under the house, so they get no mercy when they emerge. She stepped on one coming out the front door one day and almost levitated getting out of there. I heard the scream a long ways away.
    So far this year, 11 snakes with 12 shots (gave a ball of three an extra shot).

Page 8 of 8 FirstFirst 12345678

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check