Hey Guys
I have a Ruger SBH Hunter with throats almost .432 and was planing on using/trying bullets of the .431-.432 flavor but I ran into a little snag yesturday. I have some LBT 240 WFN bullets to try from AnthnyB. Yesturday while babysitting my sick daughter I decided to start that project rolling by seating an unsized bullet and checking it for function in my 94win. Well - it wouldnt go. The Lee seating die wasnt big enough for the .434 bullet to fit. I sized it to .430 and it would fit. So I used them sized .430 for my dummies with a 240 WFN and a 280 LFN. I do plan on getting another set of 44 mag dies to set up for one or two Dillon 650 tool heads to include separate seating and crimping dies.
Are there other brands of dies that will work with a .432 bullet? Is enlarging the crimping die the best method? Thoughts on shooting a .430 bullet in .432 throats? I havent done any loading of my own lead for the 44. So far it's all been storebought and condomnated - Just startin out with the 44 mag and these bullets so any kind of advise or pointers would be most welcome.
Thanks