I'm having a hard time with my reloaded 357's. The case measures 374 but where the bullet is seated it is measuring 379 a factory load is 374 from top to bottom as far as I can tell. This bulge is big enough to cause problems in my lever action. Factory loads chamber smoothly. I have reloaded some 120 grains 158 grains and 180 grains and they all bulge. My reloading dyes are the pacific brand, from back in the early 60's. I did resize the bullets with a carbide sizer. Can you tell me what I am doing wrong or how to get rid of the bulge. Would the Lee factory crimp help. Or do I need to get a new set of dyes. the boollits were sized to 358 and the cases are winchester nickel plated
Thanks for your help bushwack