For paper, I like ~4gr Power Pistol w/ 185gr SWC cast.
For a threat load, I've got 230gr GD's on top of 7.8gr Unique.
Obviously, there is a spring change b/w these two loads
For paper, I like ~4gr Power Pistol w/ 185gr SWC cast.
For a threat load, I've got 230gr GD's on top of 7.8gr Unique.
Obviously, there is a spring change b/w these two loads
3.8 grains of Bullseye and a H&G #68.
dsmjon, you really, really, really need to back that load of Unique down quite a bit.
You're well over any loading manual maximum I have ever seen, and you're risking quite a bit.
Given that 6.5 grains will substantially outrun factory loads, you're well past the danger point.
In a revolver (S&W 625 or Ruger bisley)
Hensley and Gibbs #78 with 5.3 PB
In a 1911
Lyman 452488 with 4.6 Bullseye
3.5 of bullseye and a 230 gr.
I am looking at a new load with some international clays. I was thinking about 5.6 gr. with a 230 ish cast boolit......Any thoughts or warnings?
I just got done looking at the hodgdon site....I think that might not be the best load in that weight.......Still open for suggestions.....
Mihec 200gr HP over 7.5 Power Pistol FB
I like Nosler 185gr JHP with 8.0 Alliant PP behind it.
It's a little snappy but groups nicely.
Super38
230 Lee TL with 6g Universal Clays
7 gr Unique, 200 gr SWC
4.6grs of TITEGROUP OR 5.2grs OF HP38 in any 200gr Lead boolit
http://www.youtube.com/watch?v=jmKR6...eature=related
My favorite scene!
I shoot a lot of 4.5 grains 700X with a Lyman 452460
230 RN, WLP, 4.7 Red Dot - This was Jeff Cooper's Gunsight practice load.
I have been shooting the Lee 230 grain TL boolit over 4.0 grains of Bullseye for nearly two decades (since the time TL molds came out) and it has worked well.
I have been uaing 5.5 gr Unique behind 200 gr. cast SWC ainxw the late 60's.
I like 5.3gr of Bullseye for the carry load in my Sig Carry 1911 toped off with a TC weighing in at 139.5. It is brisk but runs reliable and very straight.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |