My Money Order for one mould went out with this mornings mail.
My Money Order for one mould went out with this mornings mail.
NRA Life Member Since 1981
"The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good"-- George Washington
II Corinthians 4:8-9. We are hard-pressed on every side, yet not crushed; we are perplexed, but not in despair; persecuted but not forsaken, struck down, but not destroyed."
Psalms 25:2 O my God, I trust in thee: let me not be ashamed, let not mine enemies triumph over me.
[SIGPIC][/SIGPIC]
Check went out Tuesday Morning, sorry for the delay, I had a full boat with the protests monday...oh well thats what pays for the toys
Once a wheelweight, now its makin holes
Catshooter, I sent the money order out this morning for the 45 Group Buy. I also PMed you. Thanks, Randy.
I will find the money somewhere. The proposed finished size is .454? I was promised that on the 423 and it fell short. Can we possibly go for .455? It seems all of Lees moulds fall short of the projected size. I know youall talked of figuring this in. Has this been done. I mean looking at the other Lee moulds and fudging to help in the size dept? I know we could end up with a .457 but it is easier to size down then to size up. I need .454 minimum in my 45 Colt. I really want this mold but dont need another undersized .45 mold. I would like to cast out of weaker alloy and this makes them even smaller. I see by the replies that I am not alone i9n worrying about the size. Thanks for all your work guys. Jay
"The .30-06 is never a mistake." Townsend Whelen
"THESE are the times that try men's souls. The summer soldier and the sunshine patriot will, in this crisis, shrink from the service of their country; but he that stands by it now, deserves the love and thanks of man and woman. Tyranny, like hell, is not easily conquered; yet we have this consolation with us, that the harder the conflict, the more glorious the triumph."
Thomas Paine
Jay,
I just got off the phone with 45 2.1 and we agree to draw it up for a .455 boolit. It'll probably be that or not much smaller than .454, but of course you don't know with Lee.
If it does come out small, you could always Beagle it, if you care to.
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
Catshooter, Could you e-mail me an address so I can get you a check in the mail.
Thanks,
Jared
AgCatJHS@msn.com
Yup ,I know what your sayng. I even have sized 45-70 bullets down to .452.
Not hard if you lube them first. I use a Lee push thur dies for final sizeing
For larger diameter 45 pistolas here's an option that I posted awhile back:Originally Posted by gregg
Interesting tidbit...
The RCBS 45-300-FN is exactly the same as my LBT .455 320 LFN. I bout fell over when I ordered the RCBS new and opened the cavity.
I thought, "hmmmmm this looks familiar", and I took the LBT boolit, and it dropped for a dead fit right in the RCBS cavity.
I mentioned that to Veral, and he said it was his design hands down, and claimed his designs have been "Lifted" before.
Is it any wonder why this line of RCBS molds work so well?.. or just an eerie coincidence?..
________________
Is this the 457'' fn rifle mold you are talking about? Randy.
No Randy, it's a .455 pistol boolit. There is another thread discussing a plain base .45 boolit.
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
The reason why I ask is, I checked a couple of different online vendors that did not make reference to the mold you speak of. I am interested is why I ask.
I haven't been following closely but...
Randy if you were refering to my post it is the .457 RCBS rifle boolit.
.455 is the size of the LBT I have.
I couldn't edit my old post to add more zip codes, so here you are in a new post.
74108
33170
37803
77474
56479
24916
28601
Thinman, thank you that was generous of you.
Last edited by Catshooter; 05-19-2006 at 08:07 PM.
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
Hey, hey.....74108 that's me. Can't wait to get the ball rolling. Thanks, again for this opportunity Catshooter, Randy.
I would like to get in on this. Let me know where to send the check.
Hans
Cat,
Check went in the mail box today.
Thanks again for doing this. I'm really looking forward to getting all the Keith moulds.
What calibers are you considering doing? I'm hoping for .45 (This one), .41 and .358. Of course I fully expect you to do a .44 g.b. and so, eventhough I'm not a .44 shooter, I'm gonna get that one too. After all, I gotta get the full set of "Cat Shooter E. Keith Reproductions"!
“For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life” – John 3:16
That still amazes me…I don’t care who you are or how much I care about you, I would never let you kill my son. I can’t even begin to understand how much He loves us.
I'd definatly be in for something like this in .41.
Cayoot,
I figure I'll survey the group to see which one to do next.
I intend to do a .38/.357, .41, .44 and several in .45.
I was gonna do a .32 but got beat to it.
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
Cat-Originally Posted by Catshooter
Since the .32 is in the works already may I suggest doing either a lighter .38/.357 in the 158 grain range after the 173 grn design is run; or maybe a heavier .44 of 280-300 grains once we've already got the lighter version done.
What do you think?
Last edited by Dutch4122; 05-21-2006 at 10:11 PM.
-Matt
Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN
Originally Posted by Catshooter
You're my hero Cat!!!
“For God so loved the world that He gave His only begotten Son, that whosoever believeth in Him should not perish, but have everlasting life” – John 3:16
That still amazes me…I don’t care who you are or how much I care about you, I would never let you kill my son. I can’t even begin to understand how much He loves us.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |