Need .356 Star die with flat punch and the Star roller handle.
|
   
   
|
|
Need .356 Star die with flat punch and the Star roller handle.
Hi Kent,
PM sent.
lathesmith
I need a Star 22 and 30 flat punch and a pair of non set screw nuts.
Hi Matt, PM sent.
Hi How do I go about ordering a die and punch set size .357 is there a phone # or Email address. Bill 860 628 7671
Hi Bill,
The most reliable way to get hold of me is to send me a Private Message here on the forum, I'll send you a message shortly.
Regards,
lathesmith
Hi Chris, another die needed please:
.452 plus flat punch and lock nut with set screw
That sounds fine, PM replied to.
Pm sent
I need a 452 die flat punch w/plain locknut please.
~Chris
All taken care of Dakota, thanks.
lathesmith
PM sent for Dillon powder funnels, Thank You
PM sent for die order. Does not show in sent PM folder. Wondering if you got it.
Vern Mann
Update: PM did not send because I misspelled your user name.
Last edited by vernm; 10-26-2019 at 01:16 PM. Reason: spelling
Chris, I sent a pm about a new order. I hope you received it, if not please get back to me.
Respects,
Richard
Cat, the other white meat!!
Pm sent
Tried to send a pm last week but don't see it in my sent mail file now so I failed evidently.
Wondered if you every considered making expanders similar to the RCBS two=step Cowboy expanders. Could make to fit a Lyman or RCBS die Barrel. Buffalo Arms makes them but from the ten weeks I've waited on my most recent order there must be some unmet demand from our community. Don't need the die body - just the threaded part and barrel of the expander.
Best Regards,
John
Hi John,
I do make Lyman "M" style expander stems, the smaller two-step ones that use a 10-32 thread. I haven't made any for RCBS, as I don't have a pattern for one and am not sure what would be required.
lathesmith
I'm sure it's been asked, but in a cursory search I didn't find an answer;
What is the practical limit for sizing diameter on these dies?
Nozombies.com Practical Zombie Survival
Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!
Hi Lathesmith. I would like to order a size die, PM sent
Hi Lathesmith;
Would like to order a sizer in .401 with flat punch.
Thanks
tw
Would like to order 3 dies: .402, .431 and .357. Need a punch for the .402. Also need 3 nuts.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote