Lee PrecisionRepackboxRotoMetals2Load Data
Titan ReloadingInline FabricationPBcastcoReloading Everything
MidSouth Shooters Supply Wideners
Results 1 to 4 of 4

Thread: 94AE ejector roll pin

  1. #1
    Boolit Buddy Ekalb2000's Avatar
    Join Date
    May 2009
    Location
    Alamogordo, NM (Holloman AFB)
    Posts
    253

    94AE ejector roll pin

    Was playing with the gun. And I cycled the lever and out came the ejector. Took it insied and disassymbled it and noticed the roll pin was gone. Done a search but no luck.
    Soo.. do any of you know a place that i could get one the proper size. Heck if someone has one apart could they mic it for length and width. Then I could see what I have on hand.
    Thanks
    andy

  2. #2
    Boolit Master
    Jon K's Avatar
    Join Date
    Mar 2006
    Location
    CA
    Posts
    1,756
    Try your local hardware store/auto parts for the roll pin.
    Are you sure that's all you need? Usually when the pin falls out, it's because the ejector broke. Numrich has ejector & spring.

    Jon
    Col 2:13-17

  3. #3
    Boolit Grand Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    5,249
    I would upgrade the rifle by replacing the departed roll pin with a solid pin - made by inserting drill bit shanks until the proper diameter is found, or a bit over if there's no exact match, run the bit through there to true everything up, then grind off the fluted end of the bit to use the shank as the new pin.

    .
    Now I lay me down to sleep
    A gun beside me is what I keep
    If I awake, and you're inside
    The coroner's van is your next ride

  4. #4
    Boolit Buddy Ekalb2000's Avatar
    Join Date
    May 2009
    Location
    Alamogordo, NM (Holloman AFB)
    Posts
    253
    Went to Ace and they had some solid pins. They were a little big. Chucked it in the drill and with som 100 grit the 400 grit got it to the rite size. After hammering it in I then took the dremmel to what was left over. It aint going now where.
    Thaks for the idea pietro.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check