Inline FabricationADvertise hereGraf & SonsStainLess Steel Media
MidSouth Shooters SupplyLee PrecisionRotoMetals2Titan Reloading

Page 2 of 5 FirstFirst 12345 LastLast
Results 21 to 40 of 88

Thread: Mould Makers - Production & Custom

  1. #21
    Boolit Mold
    Join Date
    Aug 2007
    Posts
    3
    Quote Originally Posted by Sky C. View Post
    Gentlemen-

    For quite a while I have been collecting the contact information for people/companies that product moulds. Below is that listing for your information. If you're aware of others that should be added to the list - please chime in!

    Best regards-

    Sky C.

    =============

    Standard Production Bullet Mould Manufacturers

    Lee Precision, Inc.
    4275 Highway U
    Hartford, WI 53027
    tel: 262-673-3075
    http://www.leeprecision.com
    -lathe bored; aluminum; standard & custom designs

    Lyman Products Corporation
    475 Smith Street
    Middletown, CT 06457
    tel: 800-225-9626
    http://www.lymanproducts.com/lymanproducts/index.htm
    -cherry cut; iron; standard designs

    Magma Engineering Co.
    P.O. Box 161
    Queen Creek, AZ 85242
    http://www.magmaengr.com
    -cherry cut; iron; standard designs

    RCBS
    http://www.rcbs.com
    tel: 800.533.5000
    e-mail: rcbs.tech@atk.com
    -cherry cut; iron; standard designs

    Redding/Saeco
    1089 Starr Road
    Cortland, NY 13045
    Tel: (607) 753-3331
    http://www.redding-reloading.com
    -cherry cut; iron; standard designs


    Custom & Semi-custom Bullet Mould Makers

    Applegate Gunsmithing - Rob Applegate (retired)
    P.O. Box 58
    Yoncalla, OR 97499
    -cherry cut; brass; Applegate standard designs

    Ballard bullet Moulds – Tom Ballard (retired?)
    Box 298
    Clancy, MT 59634
    Tel: 406-933-8217
    -cherry cut; iron; custom designs

    Ballist-Cast - Peter Niess
    tel: 1-877-486-6546
    http://www.ballisti-cast.com/
    -cherry cut; iron; Ballisti-Cast standard designs (semi-custom)

    Brooks Tru--Bore Bullet Moulds - Steve Brooks
    1610 Dunn Ave.
    Walkerville, Montana 59701
    Tel: 406-782-5114
    -lathe bored; cast iron; Brooks standard & custom designs (135$ to your door)

    Cast Bullet Engineering - Jim Allison
    Australia
    http://www.users.bigpond.com/JIM.CBE.htm
    ???; brass; CBE standard designs (semi-custom)

    D. Mos Bullet Moulds - David Mos
    Work: 307-587-4914 (Ballard Rifle)
    P.O. Box 2876
    Cody, WY 82414
    -lathe bored; iron; custom designs

    Doughty Bullet Moulds – Richard “Old Vic” Doughty
    e-mail: doughty@blackfoot.net
    P.O. Box 36
    Plains, MT 59859
    -CNC milled, lathe bored, and cherry cut designs; standard & custom designs. Brass & iron, 1 to 4 cavity (6 cavity coming).

    Eagan Moulds – Donald V. Eagan
    PO Box 196
    Benton, PA 17814
    Tel: 570-925-6134
    -cherry cut; brass; Eagan standard designs & custom (nose pour)

    Hoch Custom Bullet Moulds - Dave Farmer
    910 N. Delaware
    Roswell, NM 88201
    tel: 505-627-1933
    -lathe bored; iron; custom & semi-custom designs (nose pour)

    JT Bullet Moulds - Jeff Tanner
    23 Passingham Avenue
    Billericay, Essex CM11 2TD
    United Kingdom
    tel: 0044 (0) 1277 653456
    http://www.jt-bullet-moulds.co.uk
    E-mail: jeff@jt-bullet-moulds.co.uk
    -brass, aluminum if over 2” dia; ball and belted ball moulds

    LBT - Veral Smith
    Div. of F.I.G. ENT. INC,
    HCR 62 BOX 145
    Moyie Springs, ID 83845
    http://www.leverguns.com/lbt/index.htm
    e-mail: LBTisAccuracy@Imbris.net
    -lathe bored; aluminum; LBT designs (semi-custom)

    Lee Precision, Inc.
    4275 Highway U
    Hartford, WI 53027
    tel: 262-673-3075
    http://www.leeprecision.com
    -lathe bored; aluminum; LEE standard & custom designs

    Mountain Mold - Dan Lynch
    E-Mail: mountainmolds@mcleodusa.net
    http://www.mountainmolds.com
    Pocatello, ID
    Note: AKA: MtnGun (on Cast Boolits site)
    -lathe bored; aluminum, brass, iron; custom designs (based on standard configurations)


    NEI Handtools - Patty Melander
    PO Box 370356
    El Paso, TX 79937-0356
    tel: 915-772-0259
    e-mail: nei@columbia-center.org; Joel jfragoso63@sbcglobal.net; 915-274-3204
    http://www.neihandtools.com
    -cherry cut; aluminum, meehanite (type of cast iron); NEI & custom designs

    Old West Bullet Moulds – Ken Chapman (retired)
    P.O. Box 519
    Flora Vista, NM 87415
    -cherry cut & lathe bored ; brass; Old West designs

    Paul Jones Precision Bullet Moulds - Paul Jones
    4901 Telegraph Rd. Los Angeles, Ca. 90022
    Tel: (323) 262-1510
    E-mail: customer-service@pauljonesmoulds.com
    http://www.pauljonesmoulds.com/
    -lathe bored; cast iron; Jones & custom designs

    Pioneer Products – Leeth Moulds
    254 Johnsville Brookville Road
    Brookville, OH 45309
    Tel: 937-833-2865 / 937-839-9741
    -cherry cut; cast iron; Leeth & custom designs

    Rapine Bullet Mould Manufacturing
    9503 Landis Lane
    East Greenville, PA 18041
    tel: (215) 679-5413
    http://plantfloor.com/pa/rapinebulletmouldcompany.htm
    -cherry cut; 2024-T3 aluminum; Rapine designs – semi-custom

    Victory Molds – Steve & Gigi Fotou
    http://www.victorymolds.com
    tel: 1-801-295-1773
    e-mail: steve@victorymolds.com
    -lathe bored; 11L17 or S7 steel; custom designs
    Old West Bullet Moulds is now up and running by Bernie Rowles
    1175 17 1/4 Road
    Fruita, CO 81521
    970-858-1449
    http://www.oldwestbulletmoulds.com
    Bernie@oldwestbulletmoulds.com

  2. #22
    Boolit Bub
    Join Date
    Mar 2005
    Location
    Santa Cruz CA
    Posts
    21
    Quote Originally Posted by Buckshot View Post
    ...............Great list! Ken Chapman of Old West has retired.

    ............Buckshot

    Ken Chapman (my father) passed away a couple of years ago, age 82.
    His manufacturing partner is still making the moulds.
    You can contact Bernie at: ALLISONMONUMENT@aol.com for the brochure.

    R. Chapman

  3. #23
    Moderator Emeritus
    JeffinNZ's Avatar
    Join Date
    Sep 2005
    Location
    Christchurch, New Zealand
    Posts
    5,821
    Thermal underwear style guru.
    "Exclusive international distributor of Jeff Brown Hunt Club clothing."
    Supplier to the rich(?) and infamous.

    Cheers from New Zealand

    Jeff.

    Floyd Files.

  4. #24
    Boolit Master powderburnerr's Avatar
    Join Date
    Mar 2005
    Location
    nevada
    Posts
    750
    It looks like rapine 's site is a dead link.is there any updated info on them?........Dean
    lover of 74 sharps
    MYWEIGH scale merchant
    " i'll tell the story 10 different ways before I'll lie to you."

  5. #25
    Boolit Master 6pt-sika's Avatar
    Join Date
    Apr 2006
    Location
    Central Virginia
    Posts
    3,887
    It is my understanding that the fellow that owned "Rapine" passed on and the company no longer produces !

    And Eagan has passed and I believe they no longer produce either .
    Go Manny Pacquiao !!!

    Double's , 6.5mm's , 444 Marlin , Sika Deer and my family in the Philippines

  6. #26
    Boolit Man Etienne Brule's Avatar
    Join Date
    Dec 2006
    Location
    Quebec
    Posts
    77

    Custom Cast Bullets & Reloads

    Hi

    I am looking for a Rapine 41 long colt mold.

    I saw that Custom Cast Bullets & Reloads is selling it.

    On their web site, the mold is listed but there is no email nor adress where to pass an order:

    http://www.customreloads.com/

    Somebody can help ?

    Thank you for the attention

    Etienne Brule

  7. #27
    Boolit Master LAH's Avatar
    Join Date
    Mar 2005
    Location
    In The Hardwoods
    Posts
    2,557
    Appears he wishes not to be bothered. Like you I see no contact information.

  8. #28
    Boolit Master
    Join Date
    Jan 2006
    Location
    SW Idaho
    Posts
    2,225
    Does anyone have a phone number or Email address for Kalynuik moulds?

    thanks,

    Rich

  9. #29
    Boolit Master Finn45's Avatar
    Join Date
    Mar 2005
    Location
    Finland
    Posts
    302

  10. #30
    Boolit Mold
    Join Date
    Jun 2008
    Location
    Western New York State
    Posts
    16
    Has anybody used Dave Farmer's 105 gr. 25 cal. bullet in a 1-12 in twist? Can 1-12 twist stabilize a 105 gr. 30-1 alloy bullet? Thanks, Terry Morgan aka Milt Farrow
    Milt Farrow "I'm not sure what it is, but it uses a lot of ammo."

  11. #31
    Boolit Buddy homefront's Avatar
    Join Date
    Feb 2007
    Location
    Pennsyltucky
    Posts
    70

    Rapine is still in action!

    Rapine Bullet Mould Manufacturing LLC
    9503 Landis Ln
    East Greenville, PA 18041
    215-679-5413

    Just ask for Ray. Hell make whatever you want, and is very knowledgeable.

  12. #32
    Boolit Mold
    Join Date
    Jun 2008
    Location
    Big Island Hawaii
    Posts
    7
    LBT seems to have a new web address: http://lbtmoulds.com

    Allen

  13. #33
    Boolit Man revolver junkie's Avatar
    Join Date
    Feb 2009
    Location
    MO
    Posts
    88
    well ill chime in for NEI
    my mould is excellent and by far the most well made one i own including an old saceo an old lyman and several lee moulds

    does take a little more time to heat up but once i get it going the only time i have to stop is when the pots empty

    the mould i have is a 2 cav alum in .454 an is a 330gr kieth style for my 45 blakhawk
    some of the guys i shoot with say it sound like a cannon going off (now if i can just get a deer to come close enough i doubt it will go very far.

    my new years resolution is to have a more positve outlook but that doesn't mean i cann't expect the @%&#*%@ worst

  14. #34
    Black Powder 100%


    cajun shooter's Avatar
    Join Date
    Jul 2008
    Location
    Livingston, La. 20 miles east of Baton Rouge, La.
    Posts
    4,433
    I contacted Barry Darr on 3/3/09 and was advised by his wife that he no longer makes bullet molds.
    Shooter of the "HOLY BLACK" SASS 81802 AKA FAIRSHAKE; NRA ; BOLD; WARTHOG;Deadwood Marshal;Bayou Bounty Hunter; So That his place shall never be with those cold and timid souls who neither know victory nor defeat; 44 WCF filled to the top, 210 gr. bullet

  15. #35
    Boolit Master

    Calamity Jake's Avatar
    Join Date
    Mar 2005
    Location
    Okla. City
    Posts
    2,381
    Quote Originally Posted by cajun shooter View Post
    I contacted Barry Darr on 3/3/09 and was advised by his wife that he no longer makes bullet molds.

    And Barry Darr is what company??
    Calamity Jake

    NRA Life Member
    SASS 15704
    Shoot straight, keepem in the ten ring.

  16. #36
    Boolit Bub
    Join Date
    Jul 2009
    Location
    Utah
    Posts
    20
    Here is another local guy...

    Night Owl Enterprises
    1645 W 150 N
    Provo, UT 84601
    Manufacturer of premium bullet moulds.

    Moulds are machined from 2024 Aluminum
    Used for high strength structural and aircraft applications.
    Tensile strength range 30,000 to 63,000 psi
    Sprue plate (blued), alignment pins, and hardware will be
    carbon steel.
    Watch this thread for our group buy over runs
    and our stock list for mould we plan on stocking.

    Contact us at :
    Pbsco1@qwestoffice.net

  17. #37
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    San Antonio, Texas
    Posts
    3,399
    Jhess, Welcome to CastBoolit Heaven.

    NOE currently has several group buys for molds running on this forum. SwedeNelson is a long time member here and a great guy to work with.


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  18. #38
    Boolit Mold
    Join Date
    Aug 2009
    Location
    NL
    Posts
    5

    Difficult choice

    Hello all,

    My first post here out of desperation

    I have a percussion rifle with a .410 bore diameter which gets me stuck for all standard BP rifle bullet moulds so I figure I may as well try to get a mould of the original bullet profile. There are two I would like to try, both of which have a slightly unusual profile.
    One is a pure compression bullet and the other is a combination compression/miniť bullet. I have all the dimensions in metric. If anyone is up to taking the challenge let me know.

  19. #39
    Mr. Darr is no longer doing mould!
    I Jim Borton is doing the mould now!
    My contact information is: James Borton
    371 N. Garber Dr.
    Tipp City, Ohio
    45371
    PH. 937-667-5027

    jim@assra.com

  20. #40
    Moderator Emeritus
    dromia's Avatar
    Join Date
    Mar 2005
    Location
    UK. Sutherland & Co Durham
    Posts
    5,149
    Welcome Jim.
    Glad to see your still in business.

    Do you have cherry/mould list?


    For fine firearms and shooting requisites visit my Web Site by clicking the link below:

    Pukka Bundhooks

Page 2 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check