WidenersMidSouth Shooters SupplyRotoMetals2Repackbox
Reloading EverythingInline FabricationTitan ReloadingLoad Data
Lee Precision
Page 1 of 5 12345 LastLast
Results 1 to 20 of 98

Thread: Mould Makers - Production & Custom

  1. #1
    Boolit Bub Sky C.'s Avatar
    Join Date
    Mar 2005
    Location
    Longmont, CO
    Posts
    65

    Exclamation Mould Makers - Production & Custom

    Gentlemen-

    For quite a while I have been collecting the contact information for people/companies that product moulds. Below is that listing for your information. If you're aware of others that should be added to the list - please chime in!

    Best regards-

    Sky C.

    =============

    Standard Production Bullet Mould Manufacturers

    Lee Precision, Inc.
    4275 Highway U
    Hartford, WI 53027
    tel: 262-673-3075
    http://www.leeprecision.com
    -lathe bored; aluminum; standard & custom designs

    Lyman Products Corporation
    475 Smith Street
    Middletown, CT 06457
    tel: 800-225-9626
    http://www.lymanproducts.com/lymanproducts/index.htm
    -cherry cut; iron; standard designs

    Magma Engineering Co.
    P.O. Box 161
    Queen Creek, AZ 85242
    http://www.magmaengr.com
    -cherry cut; iron; standard designs

    RCBS
    http://www.rcbs.com
    tel: 800.533.5000
    e-mail: rcbs.tech@atk.com
    -cherry cut; iron; standard designs

    Redding/Saeco
    1089 Starr Road
    Cortland, NY 13045
    Tel: (607) 753-3331
    http://www.redding-reloading.com
    -cherry cut; iron; standard designs

    Custom & Semi-custom Bullet Mould Makers

    Ballist-Cast - Peter Niess
    tel: 1-877-486-6546
    http://www.ballisti-cast.com/
    -cherry cut; iron; Ballisti-Cast standard designs (semi-custom)

    Brooks Tru--Bore Bullet Moulds - Steve Brooks
    1610 Dunn Ave.
    Walkerville, Montana 59701
    Tel: 406-782-5114
    -lathe bored; cast iron; Brooks standard & custom designs (135$ to your door)

    Cast Bullet Engineering - Jim Allison
    Australia
    http://www.users.bigpond.com/JIM.CBE.htm
    ???; brass; CBE standard designs (semi-custom)

    D. Mos Bullet Moulds - David Mos
    Work: 307-587-4914 (Ballard Rifle)
    P.O. Box 2876
    Cody, WY 82414
    -lathe bored; iron; custom designs

    Doughty Bullet Moulds – Richard “Old Vic” Doughty
    e-mail: doughty@blackfoot.net
    P.O. Box 36
    Plains, MT 59859
    -CNC milled, lathe bored, and cherry cut designs; standard & custom designs. Brass & iron, 1 to 4 cavity (6 cavity coming).



    Hoch Custom Bullet Moulds - Dave Farmer
    910 N. Delaware
    Roswell, NM 88201
    tel: 505-627-1933
    -lathe bored; iron; custom & semi-custom designs (nose pour)

    JT Bullet Moulds - Jeff Tanner
    23 Passingham Avenue
    Billericay, Essex CM11 2TD
    United Kingdom
    tel: 0044 (0) 1277 653456
    http://www.jt-bullet-moulds.co.uk
    E-mail: jeff@jt-bullet-moulds.co.uk
    -brass, aluminum if over 2” dia; ball and belted ball moulds

    LBT - Veral Smith
    Div. of F.I.G. ENT. INC,
    HCR 62 BOX 145
    Moyie Springs, ID 83845
    http://www.leverguns.com/lbt/index.htm
    e-mail: LBTisAccuracy@Imbris.net
    -lathe bored; aluminum; LBT designs (semi-custom)

    Lee Precision, Inc.
    4275 Highway U
    Hartford, WI 53027
    tel: 262-673-3075
    http://www.leeprecision.com
    -lathe bored; aluminum; LEE standard & custom designs

    Mountain Mold - Dan Lynch
    E-Mail: mountainmolds@mcleodusa.net
    http://www.mountainmolds.com
    Pocatello, ID
    Note: AKA: MtnGun (on Cast Boolits site)
    -lathe bored; aluminum, brass, iron; custom designs (based on standard configurations)


    NEI Handtools - Patty Melander
    PO Box 370356
    El Paso, TX 79937-0356
    tel: 915-772-0259
    e-mail: nei@columbia-center.org; Joel jfragoso63@sbcglobal.net; 915-274-3204
    http://www.neihandtools.com
    -cherry cut; aluminum, meehanite (type of cast iron); NEI & custom designs

    Paul Jones Precision Bullet Moulds - Paul Jones
    4901 Telegraph Rd. Los Angeles, Ca. 90022
    Tel: (323) 262-1510
    E-mail: customer-service@pauljonesmoulds.com
    http://www.pauljonesmoulds.com/
    -lathe bored; cast iron; Jones & custom designs

    Pioneer Products – Leeth Moulds
    254 Johnsville Brookville Road
    Brookville, OH 45309
    Tel: 937-833-2865 / 937-839-9741
    -cherry cut; cast iron; Leeth & custom designs

    KAL Tool & Die .............Rick Kalynuik
    All of my moulds are smoothsided, weight adjustable, for Paper Patch shooters.
    I don't cut GG moulds other than the ".58 Paradox" mould that I make.
    www.kal.castpics.net
    Board handle: Red River Rick

    E-mail to: kaltool@mts.net

    656 Stewart Street
    Winnipeg, Manitoba
    R2Y 1N9 CANADA





    Companys?Individuals out of business

    Rapine Bullet Mould Manufacturing (Website address is no longer any good) Company out of business

    Applegate Gunsmithing - Rob Applegate (retired)
    Last edited by Buckshot; 05-30-2012 at 01:13 AM.

  2. #2
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,833
    ...............Great list! Ken Chapman of Old West has retired.

    ............Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  3. #3
    Boolit Master
    Join Date
    Jun 2005
    Posts
    3,213
    Old west bullet molds as far as I know is no longer in business. The owner finally retired maybe a couple of years ago. Frank

  4. #4
    Boolit Master LAH's Avatar
    Join Date
    Mar 2005
    Location
    In The Hardwoods
    Posts
    3,045
    I could be wrong but thinking Ballisti Cast is also producing CNC milled moulds in addition to cherri cut..........Creeker

  5. #5
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    Oklahoma
    Posts
    216
    I just sent an e-mail to lee precision suggesting they offer something like the Ranch Dog bullet in .432 and .460 gc molds and sizer/seaters to go with them. If they get enough requests, they may expand their line to include more suitable products. It's something to think about.

  6. #6
    Boolit Bub
    Join Date
    Sep 2006
    Posts
    34
    Anybody have an email address for Cast Bullet Engineering - Jim Allison? I coudn't find one on his site. Is he still in business? Thanks.

    captainkirk

  7. #7
    Boolit Master on Heaven’s Range
    onceabull's Avatar
    Join Date
    Mar 2005
    Posts
    1,278
    JIM.CBE@Bigpond.com.au. (that's what the website just gave me...Onceabull
    "The Eagle is no flycatcher"

  8. #8
    Boolit Man
    Join Date
    Mar 2005
    Location
    USA
    Posts
    87
    ...The web site for LBT is now...

    http://www.graybeardoutdoors.com/lbt/index.htm


    ...old goat

  9. #9
    Boolit Master LAH's Avatar
    Join Date
    Mar 2005
    Location
    In The Hardwoods
    Posts
    3,045
    Here's another.............Creeker

    www.jt-bullet-moulds.co.uk

  10. #10
    Boolit Master
    Join Date
    Nov 2006
    Posts
    3,901
    Don Eagan of Eagan mould fame is gone from us and is casting in a better place, don't believe there is anyone taking his place, was the finest maker of benchrest cast bullet moulds.

  11. #11
    Boolit Mold
    Join Date
    Mar 2007
    Posts
    5
    You might want to add:
    Borton-Darr Bullet Moulds
    624 Mill Run Road
    Mill Run, PA 15464
    724.455.5837
    bwdarr@lhtot.com

    Custom moulds made to your design or ours. No extra charge for custom designs single cavity base pour steel moulds. $115 includes shipping I have over 40 years bullet mould making experience.

    Regards
    BW Darr

  12. #12
    Cast Boolits Founder/B.O.B.

    45nut's Avatar
    Join Date
    Mar 2005
    Location
    Orygun
    Posts
    4,663
    Welcome to CB Mr Darr. Happy to have another source available.

    Can you expand on a list of your capabilities? How many cavities max? Usual? Steel,aluminum construction ,,ect..

    Thank you.
    Boolits= as God laid it into the soil,,grand old Galena,the Silver Stream graciously hand poured into molds for our consumption.

    Bullets= Machine made utilizing Full Length Gas Checks as to provide projectiles for the masses.

    http://www.cafepress.com/castboolits

    castboolits@gmail.com

  13. #13
    Boolit Grand Master



    Join Date
    Dec 2005
    Location
    Southwestern Ohio
    Posts
    8,456
    I can personally attest to the quality of a Borton-Darr bullet mould. I have seen them perform where it counts! Their casting qualities are dern near wonderful. the bullets fall from the mould. Of course, these are CUSTOM moulds Jim and Barry will work with you to fit YOUR rifle, etc.

    Delivery has been excellent, also.

    Dale53

  14. #14
    Boolit Buddy kenjuudo's Avatar
    Join Date
    Mar 2005
    Posts
    388
    Had a chance to cast with a Borton-Darr mold this winter. A work of art for sure.

  15. #15
    Moderator Emeritus
    dromia's Avatar
    Join Date
    Mar 2005
    Location
    UK. Sutherland & Co Durham
    Posts
    5,134
    Mr Darr is supplying me with two moulds, they come highly recommended by DoubleDD and Martinibelgian.

    I'm looking forward to their arrival with anticipation.


    For fine firearms and shooting requisites visit my Web Site by clicking the link below:

    Pukka Bundhooks

  16. #16
    Boolit Mold
    Join Date
    Mar 2007
    Posts
    5
    45nut
    Borton-Darr Moulds specialize in moulds for competitive rifle shooting. Moulds are base pour single cavity made of steel with 3/16" thick sprue plate. Calibers .22 to .50. Each mould is made to individual client specification using any of our nearly 200 cherries, or made up to customer drawing, reproduce from sample, reproduce obsolete bullet styles or work with you in designing a bullet for your needs. We use a unique cherrie cutting process that allows us to tune bullet diameters to allow for a specific alloy shrinkage and/or oversize groove and bore diameters. No charge for making new cherrie cutters. Every mould is test cast to verify diameter and functioning of mould. Test castings are always sent with mould. Price of moulds is $115US, shipping included, handles $30 with mould order only. Our payment policy: do not prepay for moulds, "try it before you buy it" (within 30 days) If for any reason your not satified with our quality just return it.

    I also have a complete 200 yard ballistics testing range like used by commercial ammunition manufacturers, with muzzle to target velocity recording, time/pressure testing, and actual ballistic data output. The test facility is used by us to develop new bullet designs.

    Jim Borton has almost 40 years cast bullet experience and I have almost 40 years bullet mould making experience., both of us are competitive cast bullet rifle shooters.

    I hope this helps explain who we are.

    Regards
    Barry Darr
    Last edited by Mouldsmith; 03-14-2007 at 09:03 PM.

  17. #17
    Boolit Buddy
    Join Date
    Mar 2007
    Location
    Palmer,Alaska
    Posts
    138
    "Victory Molds – Steve & Gigi Fotou" Has sold all of his equipment, and moved to Seattle, and has taken on a new line of work.

  18. #18
    Boolit Mold
    Join Date
    Jun 2007
    Posts
    9
    Mouldsmith,

    I'm looking for several big bore LBT style iron molds. Let me know if you can help with the following diameters:

    .505 (500-600 grain LFN)
    .510 (600-700 grain LFN)
    .585 (700-800 grain WFN)
    .620 (900 grain WFN)

    Please email me at kevin (at) kdm-custom-bullets.com

  19. #19
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,833
    Quote Originally Posted by kdmcustom View Post
    Mouldsmith,

    I'm looking for several big bore LBT style iron molds. Let me know if you can help with the following diameters:

    .505 (500-600 grain LFN)
    .510 (600-700 grain LFN)
    .585 (700-800 grain WFN)
    .620 (900 grain WFN)

    Please email me at kevin (at) kdm-custom-bullets.com
    ............You'll probably get a faster response if you were to access Mr Darr's e-mail or phone at:

    Borton-Darr Bullet Moulds
    624 Mill Run Road
    Mill Run, PA 15464
    724.455.5837
    bwdarr@lhtot.com

    I beleive he is a more active poster on the ASSRA forum.

    .................Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  20. #20
    Boolit Mold
    Join Date
    Jun 2007
    Posts
    9
    I sent an email on 7/16/07 but haven't received a reply yet. I may just go with L.B.T. Veral responds pretty quick and he knows what I want most of the time. LBT provides very good service.

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check