first an exact copy of the 98 grain rcbs swc .32 mold. This bullet flat shoots in all of my 32mags and 3220s and a .401 light weight round nose for the 610s and 646s
first an exact copy of the 98 grain rcbs swc .32 mold. This bullet flat shoots in all of my 32mags and 3220s and a .401 light weight round nose for the 610s and 646s
I'd be in for the .32 SWC, Lloyd. Now to find 23 other guys and one who is willing to be the honcho..................
Doc
...............Lloyd, if you want one, do it. Costs you nothing. See if 45 2.1 or Tom Myers will draw it for you.
Decide if your design measurements will be alloy or actual cavity based.
Place a time limit on the offering (getting or not getting the 25) if you wish, or lacking the 25, decide amongst those interested if you will bear the setup fee and divide it amongst the subscribers.
Honchoing the design does not require up front money, a college degree or anything else. It flys or it doesn't. You as honcho decide.
................Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
I need a 32 mold. I'd be satisfied with a LEE copy of eitherOriginally Posted by Bodydoc447
- the RCBS 98 gr SWC Lloyd describes
- the Ballisti-cast 665/H&G 65 (98 gr) or
- the Ballisticast 667/H&G 67 (115gr)
I'm not picky about which one of those three I end up with.
-ktw
I need a 6-hole soup can which casts like the factory 2-hole soup can, i.e., .309" to .310".
Im basically a lazy bastard and would need a honcho too but if anyones interested that little rcbs bullet is a real shooter.
Loyd..A few guys can't do all the lifting...Cowboy up and honcho the deal. It isn't very difficult. Requires some time, but nothing "untoward". Biggest problem is managing the hoards..but I about got that figured out. Tell them you won't take any crap and stick to it! For the most part they are good folks and don't have unreasonable expectations.
ive just got no personality for dealing with people and problems. Id take 3 of them if someone wanted to get it going though
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |