RotoMetals2RepackboxSnyders JerkyInline Fabrication
Reloading EverythingLee PrecisionWidenersLoad Data
MidSouth Shooters Supply Titan Reloading
Results 1 to 16 of 16

Thread: Did I do good?

  1. #1
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,038

    Did I do good?

    Some damn enabler on this site (Steve Urquell) got me thinking about wasp rice loads.

    I went to Gunbroker looking for a sub-$350 beater in .38 Spl to play with. Found a new Rock Island M206 for $250 and figured what can I lose?

    Then spotted a S&W 14-3 Targetmaster with 8 3/4" barrel for under $300. Bit of blue wear but not bad.

    One of the guns I regret selling 20+ years ago was as 14-3 with 6" barrel...I know what great guns these are. A couple of years ago M&P Model 10's were going for $400.

    The auction had less than 2 hours to run, so I bid $350. The place selling the M206's had 10 in stock so no risk of "losing" out. Well, I ended up winning the S&W!!!

    Wasps are going to get HAMMERED!
    Don Verna


  2. #2
    Boolit Grand Master
    Mk42gunner's Avatar
    Join Date
    Aug 2005
    Location
    Butler, MO
    Posts
    9,061
    Gloat much?

    The only way you could have done better is if it comes with the wooden box, at least in my opinion.

    I cannot remember the last time I saw a K-38 for $350.

    Robert

  3. #3
    Boolit Grand Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    7,106
    I love my Rock Island 206. Only thing I did was swap out the overmolded rubber grips for smaller checkered wood grips from the Rock Island factory in part so my speed loader would work.

    It is in a small space between the bed and a small 3 drawer bedside table/drawers setup. Out of sight, and mind and easy to find in the dark without having to move. Much more flexible peeking around corners than a Rem 870 12 ga with 30" barrel.

    Still for that price you can't hardly call getting a S/W losing now can ya? Grin
    I truly believe we need to get back to basics.

    Get right with the Lord.
    Get back to the land.
    Get back to thinking like our forefathers thought.


    May the Lord bless you and keep you. May the Lord make His face to shine upon you and be gracious unto you
    and give you His peace. Let all of the earth – all of His creation – worship and praise His name! Make His
    praise glorious!

  4. #4
    Boolit Buddy

    Join Date
    Sep 2021
    Location
    Eastern North Dakota
    Posts
    491
    All I can say is "Money well spent" GW

  5. #5
    Boolit Master Thumbcocker's Avatar
    Join Date
    Oct 2007
    Location
    East Central Illinois
    Posts
    4,516
    I paid more than twice that for a k38 and have no complaints. May be time to put a little extra in the collection plate next Sunday.
    Paper targets aren't your friends. They won't lie for you and they don't care if your feelings get hurt.

  6. #6
    Boolit Master



    TNsailorman's Avatar
    Join Date
    Dec 2006
    Location
    Northeast Tennessee Hills
    Posts
    2,645
    I agree, a K frame Smith for $350.00 is a great buy these days. I haven't seen a Model 14 for sale around here for some time now. james

  7. #7
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,038
    Frankly, I have been looking for one for a long time. Either they were beat up or more than I wanted to spend. I would have preferred a 6" barrel but at the price...well...I can always take a Harbor Freight hacksaw to it!!!

    Don't need no stinking sights on a wasp gun
    Don Verna


  8. #8
    Boolit Master

    Txcowboy52's Avatar
    Join Date
    Oct 2016
    Location
    Somewhere between the Red and the Rio Grande
    Posts
    500
    Quote Originally Posted by dverna View Post
    Some damn enabler on this site (Steve Urquell) got me thinking about wasp rice loads.

    I went to Gunbroker looking for a sub-$350 beater in .38 Spl to play with. Found a new Rock Island M206 for $250 and figured what can I lose?

    Then spotted a S&W 14-3 Targetmaster with 8 3/4" barrel for under $300. Bit of blue wear but not bad.

    One of the guns I regret selling 20+ years ago was as 14-3 with 6" barrel...I know what great guns these are. A couple of years ago M&P Model 10's were going for $400.

    The auction had less than 2 hours to run, so I bid $350. The place selling the M206's had 10 in stock so no risk of "losing" out. Well, I ended up winning the S&W!!!

    Wasps are going to get HAMMERED!
    For what it’s worth I think you did great . That same enabler you speak of had the same effect on me , only difference is all I can think about is reloading some wasp loads and going wasp hunting!
    Keep your powder dry and watch your six !!

  9. #9
    Boolit Buddy
    Join Date
    Aug 2013
    Posts
    256
    I bought this one back during the Trump Slump for $350.00.





    In 2024 getting one off Gunbroker for that is quite an accomplishment.

  10. #10
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,038
    Quote Originally Posted by ATCDoktor View Post
    I bought this one back during the Trump Slump for $350.00.





    In 2024 getting one off Gunbroker for that is quite an accomplishment.
    Mine is not as nice. You made a great deal on yours!!!

    They can shoot
    Don Verna


  11. #11
    Boolit Master
    jdgabbard's Avatar
    Join Date
    Sep 2008
    Location
    Tulsa, Oklahoma
    Posts
    2,558
    Don, that's a heck of a deal in my opinion. You did good, sir!
    Currently looking for a Lyman/Ideal 311419 Mold - PM if you have one you'd like to get rid of!

    JDGabbard's Feedback Thread

    "A hand on a gun is better than a cop on the phone," Jerry Ellis, Oklahoma State House of Representatives.

    The neighbors refer to me affectionately as, "The nut up on the ridge with the cannon." - MaxHeadSpace.

    Jdgabbard's very own boolit boxes pattern!

  12. #12
    Boolit Grand Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    5,562
    Seven years ago I was trying to find a suitable donor for my faux Model 16 project. On GB I found a Model 14-3, six inch barrel and standard trigger and hammer (with grips by Goodyear). Since it had some blue loss on the barrel, it was priced at about $350 back then, and since I was going to replace the barrel and cylinder anyway, I took it. I bought this one seven years ago, so that price today, and on a nice long barrel… it sounds like a win to me!
    Froggie

    https://smith-wessonforum.com/s-w-re...k-32-here.html
    "It aint easy being green!"

  13. #13
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,038
    Quote Originally Posted by Hillbillyhunter View Post
    Sounds like a good buy. Link to the auction? I wouldn't mind some eye candy and I'm a fan of k-38s
    I do not want to get an infraction as I am under the impression that links to GB are not allowed.

    I will post a couple of pictures when I get the gun.
    Don Verna


  14. #14
    USMC 77, USRA 79


    Markopolo's Avatar
    Join Date
    Jul 2017
    Location
    Remote island in SE Alaska
    Posts
    3,079
    Quote Originally Posted by dverna View Post
    I do not want to get an infraction as I am under the impression that links to GB are not allowed.

    I will post a couple of pictures when I get the gun.

    You are allowed to send in a private message Don
    Any technology not understood, can seem like Magic!!!

    I will love the Lord with all my heart, all my soul, and all my mind.

  15. #15
    Boolit Grand Master
    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    9,038
    Quote Originally Posted by Markopolo View Post
    You are allowed to send in a private message Don
    DUHHH!!!

    Done

    Thanks Marko!
    Don Verna


  16. #16
    Moderator


    Minerat's Avatar
    Join Date
    Jun 2008
    Location
    Jefferson County, CO
    Posts
    9,697
    You can also, copy the title of the sale listing and post that and give site name and let interested parties look it up them selves.

    ie. I just won this auction on xte_Tax listed as "Joebobs rubber headed mallet whacker" have a look on xte_Tax if you are interested.
    Steve,

    Life Member NRA
    Colorado Rifle Club member
    Rocky Mtn Gun Owners member
    NAGR member

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check