Here's my thought:
A .340 copy of the 35 cal 310 Thumper. Need all the shank in the neck, and a nose .785" for a COAL of 2.800" for the 338 Federal. This will need a crimp groove as well. Thanks fellas!
Regards,
Kevin
|
   
   
|
|
Here's my thought:
A .340 copy of the 35 cal 310 Thumper. Need all the shank in the neck, and a nose .785" for a COAL of 2.800" for the 338 Federal. This will need a crimp groove as well. Thanks fellas!
Regards,
Kevin
History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.
The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.
- Ronald Reagan
Edited to add a .200" meplat.Originally Posted by rvpilot76
History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.
The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.
- Ronald Reagan
Take a look at the Accurate Molds 34-170M. Appears to be about exactly what you're looking for.
WWJMBD?
In the Land of Oz, we cast with wheel weight and 2% Tin, Man.
That's not even close.
History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.
The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.
- Ronald Reagan
I can make a quick drawing for you. I will paste it here.
Thank you, Mark!
History will record, with the greatest astonishment, that those who had the most to lose, did the least to prevent its happening.
The problem with Liberals is not that they're ignorant, it's just that they know so much that isn't so.
- Ronald Reagan
Draw up what you like and run it by Tom at Accurate Molds. If it makes sense, He'll make you one then catalog it.
If liars pants really did catch on fire, watching the news would be a lot more fun!
Do you want the heal of the bullet to be in the neck of the cartridge? Or are you okay with it being below the shoulder body junction of the cartridge? I have a heavy custom I designed for my 350 Rem Mags I think the are listed as 360 250 B and 360 270 in Accurate' s catalog. The gas check is below the neck and they shoot fine.
Is the 35 -310 Thumper a bore rider?
these are for my 350 Rem Mags
Last edited by MarkP; Yesterday at 06:07 PM.
Yes, the 35-310 thumper is a bore rider.
It is now cataloged as a 360-313-FN
https://noebulletmolds.com/site/shop...ty-pb-thumper/
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote