Large diameter Star dies

[ammohead]

Would any of you have a Star die catalog showing the largest size die Star offered to it's customers? Magma too for that matter. I am getting requests that leave dang little meat in the lube area.

[fc60]

Greetings,

I have a Magma die at 0.501".

Cheers,

Dave

[bosterr]

I have a .503 Magma die.

[Big Boomer]

I have 2 Star San Deigo sizers with sizing dies for several calibers from .225 to .454. According to an above post Magma made sizing dies up to .503. While working with .38 Spl. & .357 Mag. and wanting to use a .3585 cast boolit, I used a split .250 steel rod (split for about 1 1/2") and made a bob of emory cloth to enlarge a .357 Star sizing die to the desired diameter. It worked great for .357 Mag. & .38 Spl. but I found that a boolit that big wouldn't work in my 9mms. Fortunately, I had an extra .357 Star sizing die that would work with 9mm. So it is possible to enlarge Star sizing dies but I do not know the limits imposed by the smaller area of the sizing die that permits the lube to get to the lube grooves on a boolit. Big Boomer

[square butte]

Not Star or Magma, but I have a .514 that Lathesmith made for me

[ddeck22]

From Star documentation sent to customers in 1962. No specific sizes indicated.

[Springfield]

I have a Magma .511 die myself. Not sure how much larger you can go.

[ammohead]

Thanks for all the response.