RCBS 30-150 Cowboy. Its a plain base design thaylt shoots well in my 30-30's both Winchesters and Marlins (micro grooves)
RCBS 30-150 Cowboy. Its a plain base design thaylt shoots well in my 30-30's both Winchesters and Marlins (micro grooves)
I got him talked into Lee’s C309-170-F with Sage gas checks.
So the above Lee 170 grain gas check mold seated where the crimping groove is located won’t chamber as the micro groove rifling is engaging the forward ogive of the bullet. Sure seems odd that a design for the 30-30 can’t be seated in the crimping groove where intended? Out of spec mold? I’ll tell him to call Lee and see what they say.
if you can find one, 311440.
https://www.accuratemolds.com/bullet...bullet=31-150L
Last edited by Jeff Michel; 04-27-2024 at 08:47 PM.
“Let us endeavor so to live that when we come to die even the undertaker will be sorry.”
― Mark Twain
W8SOB
My C309-150-F engraves rifling too. The lever closes just fine and the boolits don’t pull if I want to unload it without firing.
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
My Straight Shooters thread:
http://castboolits.gunloads.com/show...raight-shooter
The Pewter Pictures and Hallmarks thread:
http://castboolits.gunloads.com/show...-and-hallmarks
Engaging the rifling is a good thing if it doesn't interfere with the bolt closing or removing a loaded round. It contributes to accuracy.
Good Luck,
Rick
Griff
NRA Patron
SASS Endowment/Life
CMSA Life
I just took possession of one of the new Ruger 336SBL’s. I’ve only had it to the range for one trip and have only tried a few starting loads. This is the NOE 312-151-RN, powder coated & sized to .311.
I can feel some slight resistance closing the lever, and quite a bit extracting the unfired round. I’ll try a few more traditionally lubed, and some with good old Alox. The first rounds showed promise, accuracy wise. But I’m concerned about chamber pressure. If other-than-powder coated bullets don’t chamber/extract easier, I’m going to abandon trying to pair this bullet with this rifle.
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |