Titan ReloadingLee PrecisionRotoMetals2Reloading Everything
WidenersLoad DataRepackboxSnyders Jerky
Inline Fabrication MidSouth Shooters Supply
Results 1 to 3 of 3

Thread: Commercial #1 ( csb-1 ) reviews and feedback

  1. #1
    Boolit Mold
    Join Date
    Apr 2015
    Posts
    25

    Commercial #1 ( csb-1 )

    I have some commercial #1 powder from American reloading
    Says to use universal data looking to load 380, 9mm, 38spl , 357mag and 45acp I’ve had good luck with cast target loads for 9mm and 45acp does anyone have any feed back on 380,38spl and 357mag
    Last edited by Saxmann10; 03-05-2024 at 02:06 PM.

  2. #2
    Boolit Master
    sargenv's Avatar
    Join Date
    Jan 2009
    Location
    Bay Area, California
    Posts
    1,454
    When I loaded the CSB-1 I picked up, I felt that it was a bit faster than Universal and was closer to International. As with all of these non canister powders, it's best to always back down 10% and work up or down as pressure signs allow. I was able to develop a 40 cal 160 gr RNL load for a 1911/2011 pistol that went 4.9-5.7 gr. 4.9got me an average of 970 fps and the 5.7 load got me 1073 fps. These were 10 shot averages.

    The only other bullet/gun combo I had with csb-1 was a 110 gr LSWC in a Glock 34 (Before anyone gets worried, I replaced the factory barrel with a Lone Wolf traditionally cut barrel). My powder charge was 4.3 up to 4.9 gr. 4.3 was 1190 fps and 4.9 was 1285 fps.

    I still have at least one can of CSB-1 and a can of CSB-1M (which is supposed to be similar to Titegroup weight wise).

  3. #3
    Boolit Mold
    Join Date
    Apr 2015
    Posts
    25
    Thanks for the reply I have almost 8 pounds of Csb1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check