Big-bore (and a few small-bore) bullet moulds, mostly rifle .500" and larger

[LeadHead72]

I've decided to sell a bunch of moulds, so please watch my other posts for more. This is the second of two posts with big-bore moulds (plus a couple small-bore moulds), most of which came from an estate. I unfortunately don't have a lot of info on them but the guy was into the old Sharps rifles and others. If I'm off-base with prices please let me know what would be reasonable. Pictures are available in Google Drive at the following link: https://drive.google.com/drive/folde...usp=drive_link

Prices do not include shipping, which I will try to keep low-cost for the buyer. I prefer discreet PayPal F&F but also accept money orders, discreet Venmo "Friends", CashApp or Zelle. If you're not comfortable with any of those methods please let me know what else you have in mind. See trade options at the bottom of this message.

01. NEI #224-55 & 224-39 2-cavity (mixed), 0.224" 39gr FP and .224" 55gr pointed, New? $50 (Aluminum)
02. NEI #224-45 4-cavity 0.224" 45gr FP-GC, Good, $80 (Steel, original NEI #2 mould)
03. Lachmiller/RCBS 452-200-SWC 2-cavity w/handles, 0.452" 200gr SWC, Exc, $90 (Includes handles)
04. NEI #512-640 4-cavity .640?" 512gr RN, New? $100 (Aluminum)
05. Shiloh (D541, 0326) 1-cavity w/handles, .541" full WC, Good, $100
06. Shiloh (J530, 4451) 2-cavity (mixed), .530" RB and .541 full WC, Good/fair, $70 (Combo round-ball and wadcutter mould)
07. Davide Pedersoli #317-541 1-cavity .541" 525gr RNFP rebated base, New in box, $75 (Steel, for Sharps rifles, paper patch compatible)
08. Hoch Custom #512-650 (C6249) 1-cavity .650"? 512gr? RNFP Nose-pour, New in box, $140 (With printed instructions)
09. Cast Bullets Engineering (CBE) #512-975 1-cavity .512" 900gr RNFP plain-base, New, $old (Brass, for 50BMG, 510 Whisper, maybe others, sells new for $180

Possible trade options:
Ruger Blackhawk "XR3" grip frame in nice condition for vintage .44 Mag Flattop
Original wood grips for S&W revolvers
Lyman/RCBS top punch numbers: 93, 190, 291, 303, 311, 320, 344, 348, 359, 360, 445, 447, 495, 518, 575, 595, 627

Moulds:
Lyman/Ideal 311008 (or 3118), 115gr RNFP PB
Lyman/Ideal 31133, (HP version of 3118)
Lyman/Ideal 358093 (or 35893), 125gr pointed tip
Lyman/Ideal 410026 (or 41026), 200gr button-nose wadcutter
Lyman/Ideal 429352, 245gr full wadcutter
Lyman/Ideal 452428, 230gr full wadcutter
Lyman/Ideal 454309, 235gr button-nose wadcutter
Lyman/Ideal 452651, 325gr flat-nose
Lyman 454647, 285gr truncated cone GC

Jacketed bullets:
.312" 100gr Hornady XTP (or other jacketed) bullets
265-300gr .429" copper-jacketed bullets such as Speer/Hornady suitable for .444 Marlin

[.22-10-45]

Pm Sent on 452428 & 454309 moulds.

[mongoosesnipe]

pm sent for 09. Cast Bullets Engineering (CBE) #512-975

[LeadHead72]

#09 has been sold.

[LeadHead72]

Bump

[LeadHead72]

Tgif

[LeadHead72]

Reasonable offers considered if I'm out of line on the prices.

[LeadHead72]

Bump

[LeadHead72]

Finally thawed out from the blizzard.....bump.

[LeadHead72]

01. NEI #224-55 & 224-39 2-cavity (mixed), 0.224" 39gr FP and .224" 55gr pointed, New? $50 (Aluminum)
02. NEI #224-45 4-cavity 0.224" 45gr FP-GC, Good, $80 (Steel, original NEI #2 mould)

Items 01 and 02 have sold.

03. Lachmiller/RCBS 452-200-SWC 2-cavity w/handles, 0.452" 200gr SWC, Exc, $90 (Includes handles)
04. NEI #512-640 4-cavity .640?" 512gr RN, New? $100 (Aluminum)
05. Shiloh (D541, 0326) 1-cavity w/handles, .541" full WC, Good, $100
06. Shiloh (J530, 4451) 2-cavity (mixed), .530" RB and .541 full WC, Good/fair, $70 (Combo round-ball and wadcutter mould)
07. Davide Pedersoli #317-541 1-cavity .541" 525gr RNFP rebated base, New in box, $75 (Steel, for Sharps rifles, paper patch compatible)
08. Hoch Custom #512-650 (C6249) 1-cavity .650"? 512gr? RNFP Nose-pour, New in box, $140 (With printed instructions)

Items 03 through 08 are still available.

[LeadHead72]

Bump

[Pfeifer]

04. NEI #512-640
Can you measure the cavity diam and length... .512"???
Thanks JP

[cdet69]

Pm sent on 452 651 mold

[LeadHead72]

04. NEI #512-640
Can you measure the cavity diam and length... .512"???
Thanks JP

Yes, it is a .512" bore and is right at 1.245" long.

[LeadHead72]

03. Lachmiller/RCBS 452-200-SWC 2-cavity w/handles, 0.452" 200gr SWC, Exc, $90 (Includes handles)
04. NEI #512-640 4-cavity .640?" 512gr RN, New? $100 (Aluminum)
07. Davide Pedersoli #317-541 1-cavity .541" 525gr RNFP rebated base, New in box, $75 (Steel, for Sharps rifles, paper patch compatible)
08. Hoch Custom #512-650 (C6249) 1-cavity .650"? 512gr? RNFP Nose-pour, New in box, $140 (With printed instructions)

Numbers 05 and 06 are sold. The above items are still available.

[LeadHead72]

03. Lachmiller/RCBS 452-200-SWC 2-cavity w/handles, 0.452" 200gr SWC, Exc, $90 (Includes handles)
04. NEI #512-640 4-cavity .640?" 512gr RN, New? $100 (Aluminum)
08. Hoch Custom #512-650 (C6249) 1-cavity .650"? 512gr? RNFP Nose-pour, New in box, $140 (With printed instructions)

Number 07 has sold. The above 3 moulds are still available.

[Pfeifer]

PM sent regarding picts of 4 & 8

[LeadHead72]

#3, #4 and #8 are still available.