RotoMetals2Inline FabricationRepackboxWideners
Lee PrecisionSnyders JerkyMidSouth Shooters SupplyTitan Reloading
Reloading Everything Load Data
Results 1 to 11 of 11

Thread: To Thick ?

  1. #1
    Boolit Master

    Johnch's Avatar
    Join Date
    Jun 2005
    Location
    NW Ohio
    Posts
    3,517

    To Thick ?

    So First I was dealing with Migraines

    Then a few weeks ago I was turned into a Pincushion
    As I got the every 3 months Botox shots
    Also took a trip to the the Doctor that implanted the Spinal Stimulator for a control Program adjustment / upgrade

    Then I FELT A LOT BETTER
    So I helped my Niece & her Husband , my Lady and 4 of her Grand Kids to harvest deer with the crossbows
    As the rut was on and deer were moving
    No huge bucks , but several decent basket 8 point bucks

    Long story short they all got at least 1 deer
    So we made sausage , burger , steaks , Back Straps and Tenderloins

    But now I am helping them make Jerky
    Also a BUNCH for me

    My question
    This afternoon I cut a rear leg thigh into 1/2" thick slices and removed the bone
    I made up a Sweet & Hot jerky brine and have the meat soaking in the brine

    Did I mess up cutting the meat in 1/2" slices ?
    If not , how long would you soak the meat before smoking and dehydrating it ?

    Thanks
    John
    Yea, thou I walk through the valley of the shadow of death, I will fear no evil; for thou art with me; Thy rod and thy staff, they comfort me.
    And I carry a LOADED Hell Cat

  2. #2
    Boolit Master
    Join Date
    Mar 2014
    Location
    St. Louis
    Posts
    2,045
    When I brine meat before smoking, I usually let sit in the fridge uncovered for 24 hours to dry a bit and let the salt into the meat.

  3. #3
    Moderator Emeritus

    MaryB's Avatar
    Join Date
    Jun 2013
    Location
    SW Minnesota
    Posts
    10,318
    Quote Originally Posted by Johnch View Post
    So First I was dealing with Migraines

    Then a few weeks ago I was turned into a Pincushion
    As I got the every 3 months Botox shots
    Also took a trip to the the Doctor that implanted the Spinal Stimulator for a control Program adjustment / upgrade

    Then I FELT A LOT BETTER
    So I helped my Niece & her Husband , my Lady and 4 of her Grand Kids to harvest deer with the crossbows
    As the rut was on and deer were moving
    No huge bucks , but several decent basket 8 point bucks

    Long story short they all got at least 1 deer
    So we made sausage , burger , steaks , Back Straps and Tenderloins

    But now I am helping them make Jerky
    Also a BUNCH for me

    My question
    This afternoon I cut a rear leg thigh into 1/2" thick slices and removed the bone
    I made up a Sweet & Hot jerky brine and have the meat soaking in the brine

    Did I mess up cutting the meat in 1/2" slices ?
    If not , how long would you soak the meat before smoking and dehydrating it ?

    Thanks
    John

    Rule of thumb is any cure penetrates the meat 1/4 inch every 24 hours, I always tack on an extra day just to make sure. That thick will give more of a steak like jerky... not the hard and brittle traditional style I make from 1/4 inch thick slices.

  4. #4
    Moderator Emeritus


    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    15,878
    A neighbor/coworker of mine (who was much older than me and passed away in 2002), had smoked/cured all kinds of stuff his whole life...and he would always offer tips, hints, and tricks. When brining fish, always freeze it first, it breaks down the cell structure to allow the brine work it's way in. I do this with Jerky also. But the bigger advantage to freezing venison or Beef for jerky, before brining, is that it's easier to slice (when it's partly froze-partly thawed), I like the 1/4" thick, like Mary suggests.

    These are the things my neighbor would share with me, if I asked a question like Johnch did.
    Good Luck
    ~~~~~~~~~~~~~~
    “If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
    ― The Dalai Lama, Seattle Times, May 2001

  5. #5
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,492
    I slice 1/8" to approximately 3/16" using a meat slicer on partially thawed cuts. Most of my family prefer the jerky to be dry and slightly brittle.

    I don't use a seasoning kit with preservatives, so prefer the jerky to be thinner and completely dry. The flavor profile does change a bit after a week or so.

  6. #6
    Boolit Buddy
    Join Date
    Jan 2007
    Location
    Texas
    Posts
    275
    <1/4" is what I used to cut. Much easier to grind, season and form

  7. #7
    Boolit Master

    Johnch's Avatar
    Join Date
    Jun 2005
    Location
    NW Ohio
    Posts
    3,517
    Just to be safe
    I ground it up this afternoon
    I figure I will let it soak in the brine for 24 more hours and then make strips out of the ground

    I guess I need to do a little less experimenting

    John
    Yea, thou I walk through the valley of the shadow of death, I will fear no evil; for thou art with me; Thy rod and thy staff, they comfort me.
    And I carry a LOADED Hell Cat

  8. #8
    Moderator


    Minerat's Avatar
    Join Date
    Jun 2008
    Location
    Jefferson County, CO
    Posts
    9,665
    If I cut the strips too thick I then cut the strips into bars and smoke. For example if I slice 1/2" thick x 1 in wide x 6 inches long. The bar becomes 1/2" thick x 1/3" wide x 6" long. Or I'll smoke it first the cut into bars.
    Steve,

    Life Member NRA
    Colorado Rifle Club member
    Rocky Mtn Gun Owners member
    NAGR member

  9. #9
    Boolit Grand Master

    gwpercle's Avatar
    Join Date
    Sep 2011
    Location
    Baton Rouge, Louisiana
    Posts
    9,298
    If you cut the meat a little too thick ... I let my teeth be my guide ...
    just before dehydrating , pound the meat thinner with a tenderizing hammer , you can also cut the pieces into smaller sections at this time ... the added "tenderizing" just before drying helps us oldsters chew the stuff ... my teeth ain't as young as they used to be .

    John ,
    Great to hear you are getting some relief from the migraines !
    I know it's been a long hard road .

    We just got to Keep On Keeping On !
    God Bless ,
    Gary
    Certified Cajun
    Proud Member of The Basket of Deplorables
    " Let's Go Brandon !"

  10. #10
    Boolit Bub
    Join Date
    Nov 2011
    Location
    Northwest Ohio
    Posts
    45
    John, sure hope the meds and stimulator help with the pain. Haven't talked with you since Ted had his gun shop on Woodville Rd. As far as the meat thickness, one thing that might make the difference is, are you using a regular wood/chip smoker, or a dehydrator. If your just using a dehydrator, might be to thick. If using a smoker, I'd say let it smoke longer. I'm sure 150 years ago, when the Indians were smoking meat for the winter, they didn't have slicers, and some pieces were thicker than others. Hope you get the pain under control!!

  11. #11
    Boolit Master

    dale2242's Avatar
    Join Date
    Oct 2007
    Location
    SW Oregon
    Posts
    2,476
    14 " thick slices cut across the grain.
    Brined overnight in your favorite brine.
    Patted dry between 2 paper towels.
    Sprinkled with black pepper and garlic powder as it`s glazing before placing in the smoker.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check