Reloading EverythingRotoMetals2Load DataTitan Reloading
MidSouth Shooters SupplyInline FabricationWidenersLee Precision
Repackbox
Results 1 to 2 of 2

Thread: Saeco 3181 ? 38 wadcutter mold

  1. #1
    Boolit Mold
    Join Date
    Feb 2009
    Location
    Sam Rayburn Country
    Posts
    26

    Saeco 3181 or 381 ? 2 hole 38 156gr wadcutter mold

    I recently picked up a saeco wadcutter two cavity mold and am curious if anyone has shot this mold before. I tried to find info on it but cant seem to locate any I found a four cavity but not a two. The nembers are stamed on the sprue plate and the three is overlapping the 1 so im not sure of the actual number for it but it casts a nice 156gr button nose wadcutter bullet and both holes are 156.3 grains on my rcbs digital scale. I havent had a chance to load any yet as ive only had time to cast a handfull for weighing and checking purposes. Let me know if anybody has had any luck with these im gonna try them out in a few weeks.
    Last edited by slimpickins; 03-03-2009 at 12:26 AM. Reason: Updating info on mold

  2. #2
    Boolit Mold
    Join Date
    Feb 2009
    Location
    Sam Rayburn Country
    Posts
    26
    Added a few notes to the header and post anybody whos used one let me know how it preformed. I would really appreciate it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check