I saw some for sale. I gather it’s used in stained glass windows.
I saw some for sale. I gather it’s used in stained glass windows.
You would be correct. The lead between the bits of glass.
Proud member in the basket of deplorables.
I've got the itch, but don't got the scratch.
Yes...Lead Came is used for stained glass windows...it comes in various hardnesses.
redhawk
The only stupid question...is the unasked one.
Not all who wander....are lost.
"Common Sense" is like a flower. It doesn't grow in everyone's garden.
If more government is the answer, then it was a really stupid question. - Ronald Reagan
It is pieces of lead formed into channels that are made to fit between cut pieces of glass. Think large stain glass windows in a church. They come in different designs. there is "U" shaped that goes on the outside of the panel and there is "H" shaped that goes between the pieces. If you plan on buying some for casting, make sure it is by the pound and not by the piece. I believe it is usually pretty pure.
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
Yes. it is the lead strip between the pieces of stained glass and lookes like a minature I-beam to creat a mechanical lock on the glass. It is also soft lead or at least what I have is.
Oops. tried to post when site was unavailable. I guess it finally loaded.
I got a box full of Lead Came from a scrapper. This was all pure lead. I've never heard of it coming in alloys of different hardness, but it surely could, I guess?
Pure Lead has a higher melting point then solder with Tin content, making for easier soldering.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
My wife used to make stainglass. The came is pretty much pure lead, might be a bit of tin to hold the sharp edges but its very soft.
EVERY GOOD SHOOTER NEEDS TO BE A HANDLOADER.
NRA Cert. Inst. Met. Reloading & Basic Pistol
Look at what the venders offer. Came can be pure or one of many alloys. Large windows requires strong came. Don't assume it is all soft.
Chill Wills
Just a warning. There is also Zinc came that is used around the edges to frame up panels. If you are looking for lead for casting, make sure it isn't the Zinc.
A vote for anyone other then the conservative candidates is a vote for the liberal candidates.
Yes t is not all pure lead, may contain zinc which is bad for a casting pot. pure will melt at 621 F
Most of it is shapped like the letter " H " , the recesses on each side are where the stained glass goes and the "came" are soldered in place .
I have no idea why it is called "came" but it is an excellent source of what can be considered Pure Lead ... there may be a small percentage of something in it but if it is dead soft and a thumbnail easily marks it , consider it lead .
Gary
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
I had no idea it had a specific name. I have a good size pile of it that I got for 35 cents a pound. It is obviously pure lead as it is very soft. I have probably 10 inches deep of the stuff in the bottom of a large garage size garbage can. I almost turned it down back at the time I bought it because I considered pure lead mostly worthless except for muzzle loaders but a little voice told me to get any lead I could. Glad I listened.
I have processed and have had analyzed hundreds of pounds of came. Some of it seems to be electroplated with tin. Some pieces that come through are steel, some few pieces are non-ferrous but not lead (zinc or possibly aluminum). These non-ferrous but not lead pieces are easy to pick out. If you are dealing with used came, it is worth while to cut solder joints off of the larger width came pieces and melt them separately. Doing this, I have gotten alloy as high as 4% tin.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |