Where can
I find cast boolits for 38S&W.
Does any one have any they would like to sale?
Thanks,
Terry t
Where can
I find cast boolits for 38S&W.
Does any one have any they would like to sale?
Thanks,
Terry t
What is the purpose? If punching paper, HBWC work well.
Matt's Bullets has correct pills for 38 S&W.
Rights, and Privileges, are not synonymous. We have the Right to Bear Arms. As soon as the Government mandates firearm registration, and permiting, then that Right becomes a Privilege, and may be taken away at our Master's discretion.
Thanks for the info.
Terry
missouri bullet company sells lead bullets for the .38 s&w. that is what I run in my Iver johnson cadet SA. They are 145 grain lined round nose bullet. they also offer a .38 hi-tech coated 145 grain round nose bullet. $41.50 for lubed bullet and $47 for the hi-tech coated bullet. both are .361 diameter
Sent from my iPhone using Tapatalk
i use same cast ones that i use in .38 spec. + they are just as accurate as when used in .38 spec -
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
My universal source for .38 S&W stuff is Buffalo Arms. They sell cases at 29 cents each -- quite cheap, imho, and also purvey cast bullets ( https://www.buffaloarms.com/361-145-...an-361145.html ) -- not to omit their selling dies, and other goodies. I have yet to have anything OTHER than greatest experience buying from them... it may be worth a look at their site. I have both an old S&W British lend-lease .38 as well as a Colt New Police -- and these bullets function quite well in both, although I do get some leading (just enough to notice ) in the Smith. (But then again, it does have a barrel approaching sewer-pipe smoothness, or lack of such...NOT the bullets' fault.)
geo
Last edited by georgerkahn; 07-13-2023 at 03:14 PM.
JoeJames if you are reloading drop the velocity of your rounds to raise point of impact - fwiw i have one cogswell conversion that shoot to same point of impact when using 3.5 grs. red dot w/158swc in .38 SPEC. + with 2.3 grs. red dot with same 158 gr. swc in .38S&W - my Enfield MK2 + lend lease M+P also are accurate with the 158 gr swc's -
https://castboolits.gunloads.com/sho...ght=piece+time
Last edited by schutzen-jager; 07-14-2023 at 07:09 AM.
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
Check out Accurate 36-130E.
I designed it just for my S&W 33-1 in 38 S&W.
I use mine at 0.363” and it shoots clean and precise.
"Time and money don't do you a bit of good until you spend them." - My Dad
Bear Creek makes two .38 S&W bullets: they are in the top row next to the .32 bullets.
https://www.bearcreeksupplybullets.com/bulletselection
I bought some factory lead ammo for my 33-1 just to get the brass and they leaded so badly that you couldn't hardly see the lands in the barrel after 2 cylinders of them. Sooo.. I carried it home and pulled the boolits and they were .357". Bad deal! I cast some 158 gr boolits from an Accurate mold that drops at .361 and the accuracy was really good when I loaded them as dropped @.361. I have read that the hollow base boolits will obturate or "slug up" when shot at .357 diameter but in my experience, it did not happen. My S&W 33-1 will not tolerate a boolit less than .361 but when it gets fed the larger boolits it is a very accurate little gun. Just my experience/ Good luck Terry, this is a neat little cartridge.
IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!
fwiw - yesterday i put lead slugs thru the bores of 2 NOS 5" .38 S&W victory barrels - also thru my pre victory lend lease 1942 M+P - all three measured .358 on both my Starett mike + digital calipers -
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
That's probably the reason you are getting the good accuracy with your boolits sized to .358. My 33-1 just would not tolerate the smaller diameter. Got to feed 'em what they want.Attachment 319235Attachment 319236 The boolit mine likes best is a Accurate Molds 36-160H and every one of my 38/357 takes to it like a duck to water.
Last edited by murf205; 10-25-2023 at 09:11 AM.
IT AINT what ya shoot--its how ya shoot it. NONE of us are as smart as ALL of us!
Cylinder throat diameters on both of my WW2 S&W Victories and Terrier 32-1 are all .363 and I shoot bullets sized .362". The .38 Special soft lead 148 HBWC bullets also shoot very well when seated out to 1.16" in .38 S&W Brass with 2.5 grains of Bullseye.
Last edited by Outpost75; 10-25-2023 at 05:49 PM.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
rainy day, 30 degrees colder than yesterday, dug out 1920 S&W new departure break top + slugged, measured bore - came out at .359 - pages from early loading manual coincides with what i find on all of mine [ 5 different pistols or barrels ] -
Last edited by schutzen-jager; 10-30-2023 at 07:32 AM.
never pick a fight with an old man - if he is too old to fight he will just kill you -
in this current crisis our government is not the solution , it is the problem ! -
ILLEGITIMI NON CARBORUNDUM
as they say in latin
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |