All flammables should be far away. Especially batteries.
All flammables should be far away. Especially batteries.
[SIGPIC][/SIGPIC]
I use a turkey fryer with a Dutch oven set up on the bed of my f250.
I found a plumber's setup in an estate auction. No one really understood what it was, a 3 and 4" okem chisel crimper, a chain iron pipe cutter, a 100# cast iron pot and a long handle cast iron pour ladle. I am not going to pay for it, was the only bidder. I found a heavy duty fryer stand at Wally World in Destin, made for a big heavy duty fish fryer. Had an outside propane outlet installed on my shop building when they put in the heater pipeing from my underground propane tanks. I use small and large muffin tins for ingots and use a commercial flux. I alloy at a very high temperature to make a very hard alloy. I can throw a blue flame that engulfs the entire pot, easily reaches 1,300 in minutes and will alloy most anything in my pot.. not tried adding copper wire, yet, but is a thought. I have a bunch of LBT Blue lube but have gone to mostly PC bullets, sized using case lube on a pad.
“There is a remedy for all things, save death.“
Cervantes
“Never give up, never quit.”
Robert Rogers
Roger’s Rangers
There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves.
Will Rogers
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |