I am looking for a source for the LEE 6 cavity alignment style mold pins.
Can anyone recommend a source or sell me some?
I want to make a 20 cavity 22 cal core mold
I am looking for a source for the LEE 6 cavity alignment style mold pins.
Can anyone recommend a source or sell me some?
I want to make a 20 cavity 22 cal core mold
I bought some from LEE, they are an odd size. I may still have them.
I ended up making my own like Magma uses.
I used a 60* center drill to make the female part and turned the male part.
How many do you need?
I have seen a few mold makers just use roll pins
I got some from Lee about 8 years ago and they also make some over size. Measure the old ones. I had a problem with a new mold with a pin coming lose and Lee told me I got the mold too hot and sent me some over size pins. They did offer to fix it.
Last edited by 45DUDE; 04-29-2023 at 02:09 PM.
I found the ones I bought many years ago from LEE and they mic at .301 for the female and.2995 for the male.
Really oddball sizes, that must be why I didn’t use them!
Magma uses .313 and a 5/16” reamer or new drill makes the right size hole.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |