I would like to purchase a metal Mec 20 gage drop tube.
Its a long shot but I'm hoping someone has a few mec parts they no longer have a use for.
Thanks
|
   
   
|
|
I would like to purchase a metal Mec 20 gage drop tube.
Its a long shot but I'm hoping someone has a few mec parts they no longer have a use for.
Thanks
Probably can alway buy one from MEC.
He could, certainly, but I'm often amazed at what folks find here on the Swappin'. I think the OP should mention the model and date of his MEC as well because surely there could be differences.
About $20 at MEC for a replacement rammer for a 600. That's two boxes of double AA's today.
The loader is a pre- 1982 600 jr. I didn't list that because for the most part a drop tube is a drop tube on the Mec loaders. Plus if a guy has a drop tube in a box of stuff chances are hes not going to know what loader it goes to. I don't need the rammer tube I need the drop tube which has the funnel on top and slides into the rammer tube. If I could buy one from Mec I would have already done it instead of posting here. The replacement they offer is thin wall plastic and I don't like those because of static electricity.
Like I said in the op I know its a long shot but I know there are a lot of old guys here like me with boxes of odds and ends of parts.
If you think you might have one shoot me a pm
Thanks to anyone that takes the time to look in their spare parts they no longer need.
I made one years ago for a 410 press .. out of 3/8 copper tube to fit a universal charge bar.
Worked pretty good. Make sure you polish the inside of the copper tube
If the mec pn you need is #8205, then ebay gots 'em.
My basement doesn't have static electricity in the summertime, so I'm lucky.
I checked ebay before I made my want to buy add here.
Still looking. Hope someone has one in a box of odds and ends.
Boolit Bub
That's for a 12 and 16 ga.
Still looking
This is making me crazy. You got me looking for a metal powder bottle now!
An old Winchester powder can might work!Originally Posted by weakhand luke
Post above ( #5 ) would seem to be the answer for you.
Could use a flairing tool to make the funnel part!
I have some MEC 20 ga. parts.
PM me your email, and I will send a picture of what I have. (...The forum's upload "feature" isn't working for me today.)
KLC
“.....Nuttier than a squirrel turd.” - An assertion by a fellow forum member
PM sent
Found what I need.
Thank you kl
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
