Titan ReloadingWidenersRotoMetals2Inline Fabrication
Lee PrecisionRepackboxReloading EverythingMidSouth Shooters Supply
Load Data
Page 1 of 2 12 LastLast
Results 1 to 20 of 29

Thread: Repairing, restoring, cleaning up, or refinishing a rifle stock.

  1. #1
    Boolit Buddy Gunfreak25's Avatar
    Join Date
    Nov 2008
    Location
    Arizona
    Posts
    265

    Repairing, restoring, cleaning up, or refinishing a rifle stock.

    There are hundreds of ways to go about doing any of these. Everybody will have their own opinion on what works best for them. However, are their methods appropriate for the stock they're working on? Too often I see people using glue and oven cleaner on gunstocks, which makes me cry. So I thought i'd do a post on the basics of working on a gunstock. Lets go over some steps. For example, say we're working on stock for a Garand. This stock is very greasy, black with oil, and there are cracks in the side of the stock, missing pieces of wood or gouges. You want to refinish the stock, not throw it away. It can be saved!

    Lets talk about some items most commonly used in working on gunstocks, i'm listing the items that are not appropriate to use, or items that must be used carefully.

    -Purple Power, "Easy-Off" Oven Cleaner, or any other Kitchen degreaser.

    These items are all INAPROPRIATE for working on a stock. They are grease cutters, and contain chemicals that are very harmful to wood. Oven cleaner is even worse. It contains LYE. LYE is very caustic stuff, just getting a whiff of it makes my lungs burn. This chemical attacks the wood fibers in a stock, breaking the natural glue found in wood down too. Not only that, but your stock then requires heavy soaking in water to get it out, and any that is left in the wood will continue to break it down, it may also attack the metal on your rifle when assembled.

    The correct product to use for stripping is Klean Strip brand Strip X

    Unlike the cleaners posted above, StripX is chemically designed to be safely used on wood stocks. It does not break down the fibers, or the natural glue found in the fibers of stocks. StripX removes all types of finishes, from that glossy black oil buildup, stains, polyurethanes, shellac, and any type of varnish, it also removes paint from those "bubba" rifles found at pawn shops. In the case of an M1, i'd dab it on heavily with a brush, let it work for 20 minutes in a cool area as heat will evaporate the stuff. Key is, if the stock is "wet", it's working. If It's dry, your need to apply more stripper or move to a cooler area. After sitting 20 minutes, use a plastic scraper tool to scrap off the loosened gunk into a disposal bin. After scraping, you need to wash off the stripper. It's not critical you get 100% out of the wood, StripX is designed to go completely innert once dry. Take the stock to a source of hot running water, I use a bathtub. While rinsing the stock, you should be using a stiff nylon brush or a soapless brillo pad to remove any more surface finish. Then sit the wet and cleaned stock in an area to dry for 30 minutes. In a cool area. Heat may crack the wood when it's wet. When the surface of the wood is dry after 30 minutes, you can tell if it may need stripping again. If so repeat the above instructions. If not, then allow your stock to dry for 2 days. Some say 24 hours, I like an extra day ontop of that.

    Now we can move onto the next step. Oil removal. The surface of your stock is clean and oil free, making it much easier to leech out the loads more cosmoline deeper down in the stock. Like above, some people will use an oven cleaner, see the stock is clean, then put a finish on it. Yes, the SURFACE is clean, but just a little deeper down, there lies lots of cosmoline. HEAT is the absolute greatest way to remove cosmoline. It's what was used to put it into the wood, it's what can be used to remove it. If your oven is big enough, you can put your stock in the oven on LOW (around 175). Higher temperatures will not leech it out any faster, and may even cook the cosmoline, solidifying it. Let the stock sit in the oven 20 minutes, remove it, wipe it down with paper towels, put it back in. Repeat this cycle every 20 minutes until you notice no more oil is weeping to the surface.
    At this time you can give the stock a good scrubbing with some steel wool
    ( 000,0000 grades) and denatured alcohol. It's found at any Wally World store for about $7 for a big can. A can lasts me a year. Scrub one area of the stock at a time, when you've scrubbed your area being worked on, quickly wipe off the oily mess with a paper towel. And simply repeat this process of scrubbing, wiping until the whole stock is clean. Now you will need to let the stock sit for up to 2 weeks.
    This will allow the oil to weep it's way back to the surface. Even after just a few days you will notice your stock is a little darker from the oil weeping the to surface.
    Yes i know, 2 weeks is along time to wait to simply refinish a piece of wood. But it's this long step that nearly everybody misses, they then wonder why their finishes don't go on right or dry later. Anyway. After this time, you'll want to put your stock in the oven again. Do the whole cycle until it stops weeping. Then take it to the shop and give it another cycle of the denatured alcohol and steel wool.
    By now you should be ready to move onto the next step. Depending on how dirty your stock is you may need to let it sit again, giving it time to weep more oil.

    So now your stock is stripped, the majority of the oil has been dripped out of the thing, and it's clean. This mythical M1 stock we're working on has "splits and cracks" in it, so this is the time to perform the repairs. Repairs will not hold up well on an oily stock, that's why I stress getting as much oil from the stock as possible.
    Not only that, but oil soaked stocks over time get what I call "oil rot". The wood is so soaked that it begins to crumble away in the internals, leading to more damage and cracks. The oil litteraly turns the wood into hard mush.

    Lets address the cracks in the stock. There is a split running full length down the middle of the top handguard, and there are 4 large and very deep gouges in the stock, as well as dome dents. There is a small chip near the buttplate too for the heck of it.

    First, you'll want to remove dents. It's really easy! Take a soaking wet cloth, and lay it over the dent, let it soak for a minute or two. In the meantime, heat up an iron to the hottest it will get. If it's a steam iron, that's even better. Lay the hot iron ONTO the rag, pressing down good and working it back and forth. What will happen is the water soaked dent will start to get hot from the steam, and will pop out. Old dents may require multiple 20 second passes with the iron, new dents come out fairly quickly. Just keep the rag wet and it will not burn, it will turn brown but will not burn.

    Dents are gone. Now we should take care of the little chip of wood near the buttplate. But I need to discuss 3 more items first, and their proper useage.

    -Sandpaper
    -Gorilla glue or super glue
    -Fiberglass cloth

    First. Sandpaper. EVIL! Think of it as a LAST RESORT. Remember, not only does sanding deminish the value of a stock, once wood is gone, it's gone FOREVER!
    On this particular mythical M1 stock, i'd use a 150 grit paper ALWAYS with a sanding block. To keep from rounding the sharp edges of the wood, and to apply even pressure to the stock. In this case we HAVE to use sandpaper for this stock. We need to get some sanding dust collected in a little cup for our gouge filler, and we'll need to lightly sand the stock to sand the filled and repaired gouges smooth with the stock. If done right you will hardly remove any surface wood.

    Second, gorilla glues and super glues. Neither of these are appropriate for stock work. Why? Gorilla glue foams up during drying, so it looses the majority of it's structrual integrity, the slightest shock from recoil is enough to break a repair. Super glue, while very strong, will deteriorate over time with the oil from a stock. Plus, it's nowhere near as strong as fiberglass. The two products I have to whole heartedly recommend for stock work, is Brownells Acraglass , and in a pinch, Devcon 2 ton clear epoxy weld with a 30 minute dry time.
    Both are very similar products, but the Acraglass comes with neat dyes and other things to help blend in repairs. They are both epoxie based, extremely strong and stand up to oil perfectly when cured.

    Fiberglass cloth can be found in the auto body section at walmart, it's cheap and works extremely well for reinforcing high stress area's in a repaired stock. Like the action area of an Enfield or the inside of a thin handguard.

    So lets address the chip on this mythical M1's buttstock. First the area should be cleaned with a q tip and denatured alcohol to remove any oil that might be there.
    After that dries, use your sanding dust you got from a light sanding from your stock, and mix it with either the Devcon or Acraglass. Then use a toothpick or popsickle stick and dab on enough gouge filler to fill the gouge, if you find it runs or drips, you can tap on a little sanding dust ontop of it with your finger. It soaks it up and keeps it stable, and from dripping. Let this dry until completely rock hard.
    Then use a small piece of sandpaper to lightly sand it away until flush and smooth with the stock.

    Next lets tackle the biggest part. But by no means the hardest. The crack down the middle of the upper handguard. I'd use the Acraglas for this repair.
    First make some preperations. You'll need some release agent like paste wax, some waxed string, a wide section of wood to hog tie the cracked handguard shut against.

    First clean the area to be repaired with DA (denatured alcohol). Then use some paste wax around the edges of the crack (NOT IN YOUR CRACK) to keep the runover from the acraglass from sticking to unwanted places. Mix up some acraglass using the dye with it that matches in color with the look of your stock when wet with water, and put as much of it into the crack as you can without putting in too much to runover. Work the crack open and shut to get the stuff deep down in there, use a toothpick if necessary. The stuff starts to harden in 15 minutes, which gives it time to soak into the wood for a strong repair, but also gives you time to work with it. Wrap a sheet of wax paper around your wood block to keep it from sticking. Then put your wet handguard onto the block of wood, and a small sheet of wax paper over the crack too, then use your wax coated string to HOG TIE the thing as hard as you can to your block of wood. Do it in such a way that as you tighten it against the board it closes the crack from top pressure.
    Once tight, knot it, and find it a place to dry for 2 hours or until fully hardened.
    Then unwrap your handguard, the waxed string and paper will have kept anything from sticking to the glass. Carefully use some sandpaper to sand the repair smooth and flush with the handguard. DONE! On some handguards you have extra room under the handguard and the top of the barrel, in this case I like to employ the use of fiberglass cloth. After making the repair to the handguard and cleaning up the repair once dry, I use a dremel to shave down just a little hollow of wood to be filled in with the fiberglass cloth, I lay down a good layer of either Acraglass or Devcon into the bottom of the handguar, and lay on a cut to size sheet of fiberglass over that with a popsickle stick. Use enough resin as it takes to turn the cloth a clear color, while tapping the cloth to remove any air bubbles. Then let it dry until fully cured and hard, and use some sandpaper to clean the area up. The result should be a repair that will last longer than you will!


    So now our mythical stock is clean, deoiled, repaired, and ready for a final surface prep. I use 220 or 250 grit paper to smooth it out a bit, then 0000 steel wool to buff it even more.

    Now your ready for a stain or finish. Go straight to your finish of choice if you don't want to use stain. If you do want to stain, let me tell you that there are lots out there to choose from. Oil based, water based, and alcohol based stains. On this particular stock if I wanted to use an oil based stain, i'd brush the stain on and let it darken no more than 10 minutes, then i'd vigorously wipe off the excess. If you don't, the carrier in the stain (oil) will get super sticky on the stock and will NEVER dry. I let it dry for a few days, then repeat again until it's the color I want. Oil based stains most often require multiple treatings to get the color you desire.
    Water based stain is good too, but will bead up on an oily stock, it's best used on new, clean stocks. My favorite is alcohol based stains. Alcohol based stains have a very very fine pigment to the stain, they dry in under an hour, and because it's alcohol based it will penetrate and DARKLY stain any type of wood and cut through any type of grease or surface oil. Brownells carries a product called Chestnut Ridge Military Stock Stain, it's dark walnut with a red hue. And i'm in love with the stuff. It can also be mixed with shellac to turn the amber stuff a red color.
    When mixing stains with finishes, just remember, oil mixes with oil, water with water, and alcohol with alcohol. Mixing a water based food coloring die with a polyurethane does not work. There is one exception, you can mix water based food coloring die with alcohol. It' simply thins it out.

    So as far as finishes go it's pretty simple and completely up to you. There's Tru Oil which is mainly boiled linseed oil (BLO) that's been heated and treated with dryers and polymers. There's BLO which is the correct finish for most military rifles.
    Shellac which is used on alot of Russian Mosin rifles. And my least favorite, polyurethane. Which is best suited to new rifles and shotguns.

    I hope this lengthly post has helped any of you with questions on stock refinishing or repairing. This is just the tip of the iceberg though, the basics. Should you have any questions just email me. Now i'm going to go soak my fingers in an ice bath for awhile.
    "The tree of liberty must be refreshed from time to time, with the blood of patriots and tyrants. It is its natural manure." -Thomas Jefferson

  2. #2
    Boolit Grand Master

    MtGun44's Avatar
    Join Date
    Nov 2006
    Location
    eastern Kansas- suburb of KC
    Posts
    15,023
    Good info.

    Try Watco Danish Oil for the finish. Good stuff.

    Bill
    If it was easy, anybody could do it.

  3. #3
    Boolit Buddy Gunfreak25's Avatar
    Join Date
    Nov 2008
    Location
    Arizona
    Posts
    265
    Watco's Danish Oil is not very different from BLO. In fact they're almost the same, the difference is the danish oil has a dye added to it, and you get alot less oil for the same price as BLO.
    "The tree of liberty must be refreshed from time to time, with the blood of patriots and tyrants. It is its natural manure." -Thomas Jefferson

  4. #4
    Boolit Grand Master
    Shiloh's Avatar
    Join Date
    May 2006
    Location
    Upper Midwest
    Posts
    6,763
    Organic boiled Linseed Oil. The REAL stuff. Water based Mahogany Red analine dye powder for color. My Krag looks Great!!

    Shiloh
    Je suis Charlie

    "A society of sheep must in time beget a government of wolves."
    Bertrand de Jouvenel

    “Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one.” – Joseph P. Martino

    “If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand.” – Milton Friedman

    "Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin

  5. #5
    Boolit Buddy
    .357's Avatar
    Join Date
    Jun 2009
    Location
    Nuevo Mexico
    Posts
    403
    linseed oil is my favorite
    Μολὼν λάβε


    Lord, make me fast and accurate. Let my aim be true and my hand faster than those who would seek to destroy me. Grant me victory over my foes and those that wish to harm to me and mine. Let not my last thought be “If only I had my gun”; and Lord if today is truly the day that You call me home, let me die in a pile of brass.



    I am out of town, enjoy your holidays.

  6. #6
    Boolit Master
    winelover's Avatar
    Join Date
    Apr 2009
    Location
    North Central Arkansas
    Posts
    2,403
    I had good results refinishing a Dixie "Tennessee Mountain Rifle" using Tung Oil

    Winelover

  7. #7
    Boolit Master
    Join Date
    Jan 2008
    Location
    North South Dakota
    Posts
    618
    Very good info....I have two Trapdoors Ive been thinking of sprucing up...maybe I'll try

  8. #8
    Boolit Buddy Rockydog's Avatar
    Join Date
    Apr 2009
    Location
    Central WI
    Posts
    408
    Shilo, Do you dissolve the die powder in the oil or dissolve it in water and stain prior to oiling? RD
    “A wise and frugal government, which shall leave men free to regulate their own pursuits of industry and improvement, and shall not take from the mouth of labor the bread it has earned - this is the sum of good government.”

    Thomas Jefferson – Author of the Declaration of Independence and 3rd President of the USA

  9. #9
    Boolit Master
    Newtire's Avatar
    Join Date
    Mar 2005
    Location
    Star, Idaho
    Posts
    2,926
    I have done some with the linseed oil and some with Danish and some with Homer Formby's. I liked the Homer Formby's stuff mainly because it dried and doesn't have to be added to as time goes on. They all look great though. The real secret is in the preparation if you ask me. Search on a posting I put up on a Lemon Merengue finish I got out of the 2001 Gun Digest. It's the best I have seen for smooth. I am interested in that red mahogany stain now!

  10. #10
    Boolit Master
    Bullet Caster's Avatar
    Join Date
    Nov 2011
    Location
    Eastern Tennessee
    Posts
    856
    Time for my 2 cents worth. After purchasing my M1 Garand, I noticed that it has a birch stock with american walnut handguards. There was an Army surplus store in Pigeon Forge, TN, that was run by an old Marine (WWII vet) and he examined my M1 and took it apart. He told me that I should never get rid of that birch stock because he said it had the cutout for a sniper scope and that it was a rather rare stock. I asked him what I should do to refinish the stock and he told me to NEVER, repeat NEVER use anything but Tru Oil on the stock--that Tru Oil was meant for military stock finishes. My stock has a few dings in it and I wanted to keep it that way as it adds character to my old WWII M1 Garand. He sold me a nicely used ammo belt that was WWII surplus. I also found a web site that lists all serial numbers of M1s and the manufacture dates. I was surprised that my M1 was made in May, 1942. It still has a great bore with a National Match op rod. The old Marine took an M2 ball cartridge and stuck it in the muzzle bullet first and it would not go in up to the shell casing. He told me that I had a very good rifle and to take care of it, which I have done over the years. Ive been offered $2,000 for it and I simply won't sell it for no amount of money. I've since put about 4 coats of Tru Oil on it and had enough Tru Oil to refinish 2 AK-47 stocks. My Yugo AK has about 10 or more coats of Tru Oil because I wanted to fill in the stamped number on the stock that matches the rifle number. I did this one coat at a time and usually waited at least 24 hours for each coat to dry. I finally got the number stamped into the wood completely filled up and it is one of the best looking stocks around. I have a friend who painted his stock with black paint and after seeing mine, he wanted me to refinish his stock for him. I have refinished quite a few stocks over the years and I never, never use any polyurethane on any stock because if it gets wet and not dried promptly, it begins to come off and leaves splotches in the finish. Tru Oil will not do this even when it gets wet and not dried immediately. I found this out the hard way. I tend to take an old vets word for it and will not use anyting but Tru Oil on a stock. Thanks, BC
    Last edited by Bullet Caster; 12-03-2011 at 03:56 AM.
    Jesus said, "I am the way, the truth, and the life: no man cometh unto the Father but by me."

  11. #11
    Boolit Buddy The Virginian's Avatar
    Join Date
    Sep 2009
    Location
    Potomac Falls, Virginia USA
    Posts
    148
    Are you sure he said Tru Oil rather meaning Tung Oil as Tru Oil is a commerical product never used by the US Military.

  12. #12
    Boolit Master
    Join Date
    Nov 2008
    Location
    coastal north carolina
    Posts
    1,108
    polyurethane will not peel from getting wet if it applied right. water cannot get thru it. If you don't coat the entire stock, including under the buttplate, moisture can migrate thru the wood. I have seen some commercial stocks peel but I never had one I built that gave any problem. You can't put it over oil and expect it to stick. It just acts like mold release. If you are trying to keep a military original looking you go with what they were originally.

  13. #13
    Boolit Master
    Join Date
    Apr 2010
    Posts
    1,035
    CMP web site has all the info on the stocks and finishes...

  14. #14
    Boolit Bub tadeus's Avatar
    Join Date
    Apr 2010
    Posts
    33
    Gunfreak 25, Thanks, that is very good information. I used BLO all the time (even in furniture) and while you have to work a lot with it (wet sanding etc....) it gives you a very nice and durable finish.

  15. #15
    Boolit Master
    Join Date
    Mar 2011
    Posts
    819
    I use brown shoe polish for stain and polyurethane. It works fine. Gorrilla glue works fine except for the little holes. It is supposed to be more resistant to heat and vibration than epoxies which is why I have used it on sights and ribs.If you add some graphite it looks like steel. Since it expands as it dries it can really fill in spaces. Practice helps.
    Closest recorded range Chrony kill (3 feet with witnesses)

  16. #16
    Boolit Buddy o6Patient's Avatar
    Join Date
    Mar 2011
    Location
    N.H.
    Posts
    384
    The stuff I've been using recently is Laurel Mountain Permalyn.
    It's a very water proof finish.

  17. #17
    Boolit Master

    Join Date
    Aug 2011
    Posts
    3,492
    I seek some advice, though I have the feeling I know the answer already. I may be looking at crossbolt installation in the near future. Looks like the bolts can never sit flush unless the stock just happens to be perfectly flat at the bolt location (it wont be). So I either have recessed bolts, or I install ebony plugs on top of the bolts. And if I put plugs on the bolts, I can't really patch the finish after sanding smooth, can I. It becomes a strip-the-entire-stock and refinish prospect? No way to avoid that?

  18. #18
    Boolit Buddy
    Join Date
    Nov 2010
    Location
    down by the bay
    Posts
    367
    With all these details, knoledge, questions and other ppls ideas stock reworking could make a sucessful category all on its own. Just an idea....

    L. Bottoms

  19. #19
    Boolit Master



    w5pv's Avatar
    Join Date
    Jun 2011
    Location
    Orange,TX
    Posts
    2,672
    Thanks for all of the good information.I have some wood that I need to work on.
    Are my kids/grandkids more important than "o"'s kids, to me they are,darn tooting they are!!! They deserve the same armed protection afforded "o"'s kids.
    I have been hoodwinked but not by"o"
    In God we trust,in "o" never trust
    Support those that support the Constitution and the 2nd Amendant

  20. #20
    Boolit Buddy
    Join Date
    Apr 2011
    Location
    Pacific Northwest
    Posts
    146

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check