I am having great difficulty finding a load for the 35 Remington using the Saeco 250 gr cast bullet. I usually use IMR 4198 or IMR 4895 powder for this cartridge and would appreciate any safe load suggestions.
I am having great difficulty finding a load for the 35 Remington using the Saeco 250 gr cast bullet. I usually use IMR 4198 or IMR 4895 powder for this cartridge and would appreciate any safe load suggestions.
Not the powders that you mentioned, but I use 33.0gr of H322 and a WLR primer in my 21" contender carbine with that bullet. Average velocity is 1933 FPS. It is very accurate and hits hard on both ends.
These are loads I got at Lasc, they are by Glen fryxell. 31 grains imr 3031= 1906 fps and good accuracy. A.A. 2520 32 grains for 1897 fps and great accuracy. Sorry if I spelled your last name wrong Glen but thanks for all those articles they are outstanding. Mark
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |