Ballisti-CastStainLess Steel MediaMidSouth Shooters SupplyLee Precision
Inline FabricationRotoMetals2Titan ReloadingGraf & Sons
Results 1 to 3 of 3

Thread: 250 gr Saeco load for 35 Remington

  1. #1
    Boolit Master hicard's Avatar
    Join Date
    Jan 2007
    Location
    Northern Kalifornia
    Posts
    1,281

    250 gr Saeco load for 35 Remington

    I am having great difficulty finding a load for the 35 Remington using the Saeco 250 gr cast bullet. I usually use IMR 4198 or IMR 4895 powder for this cartridge and would appreciate any safe load suggestions.

  2. #2
    Boolit Master
    Join Date
    Mar 2007
    Location
    New Brunswick Canada
    Posts
    234
    Not the powders that you mentioned, but I use 33.0gr of H322 and a WLR primer in my 21" contender carbine with that bullet. Average velocity is 1933 FPS. It is very accurate and hits hard on both ends.

  3. #3
    Boolit Bub
    Join Date
    Dec 2006
    Location
    stockton lake ,missouri
    Posts
    44
    These are loads I got at Lasc, they are by Glen fryxell. 31 grains imr 3031= 1906 fps and good accuracy. A.A. 2520 32 grains for 1897 fps and great accuracy. Sorry if I spelled your last name wrong Glen but thanks for all those articles they are outstanding. Mark

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check