I found a bunch of 38 special brass when cleaning my work shed.
1000+ total with roughly 600+ brass and 400+ nickel
All of it was run through some cob media because the wrens had built a nest on top of the box of brass and I had to knock the dust off so I could check for splits; I know nickel tends to be finicky, so I ran those through a FL sizer, just to recheck for splits. I believe I got those weeded out. (It may have been a little extra work, but I'd sooner not sell splits).
$75 shipped in a flat rate medium.
Only trades considered are 30 carbine brass, 30 carbine taper crimp die (prefer Lee), Lee 0.310 or 0.311 push through sizer, 30 carbine trim stud and holder, 30 cal bullet mold producing 100-120gr bullets.
Paypal preferred, but will take check or USPOMO.
Shown in repurposed, yet convenient screw container.