WTS Lee 6 Cavity 452-200-SWC Mold and Handles

[JMax]

Lee 6 Cavity 452-200-SWC Mold and Handles $75 Shipped

I use graphite spray lube on my molds so they are black on top

MO, Please no PayPal as I do not use is

[kywoodwrkr]

What kind/brand graphite spray lube?
Thanks.

[JMax]

One of the members here mentioned it a few years ago and I got it from Amazon and have not gone back to traditional lubes for my NOE and Lee molds
Anti-Seize Technology
Graphite Spray Dry Film Lubricant

[MrWolf]

One of the members here mentioned it a few years ago and I got it from Amazon and have not gone back to traditional lubes for my NOE and Lee molds
Anti-Seize Technology
Graphite Spray Dry Film Lubricant

I looked that up on Amazon and they only sold by the case. Only found one other place but not paying $15 shipping. Was curious on how well worked. Thanks.

[JMax]

I converted over from synthetic 2 cycle lube about 5 years ago with no problems for all of my molds and have used it ever since. I am still on my first can as a little goes a long way. Originally I bought two cans and have cast thousands of both pistol and rifle bullets. The graphite film is extremely thin and does not measurably reduce bullet diameter. I preheat my mold to 400F and start throwing good bullets from the git go. With a six cavity mold it rains nice bullets.

I looked on the web and a CRC graphite spray is available in single cans for a reasonable price that may also work well.

[MrWolf]

I converted over from synthetic 2 cycle lube about 5 years ago with no problems for all of my molds and have used it ever since. I am still on my first can as a little goes a long way. Originally I bought two cans and have cast thousands of both pistol and rifle bullets. The graphite film is extremely thin and does not measurably reduce bullet diameter. I preheat my mold to 400F and start throwing good bullets from the git go. With a six cavity mold it rains nice bullets.

I looked on the web and a CRC graphite spray is available in single cans for a reasonable price that may also work well.

Ordered it thanks.

[JMax]

Bump er up

[JMax]

Bump er up

[JMax]

Bump er up

[JMax]

Price reduced to $65 shipped

[kbstenberg]

JMax do you remember what the bullets drop at?

[JMax]

spf

[mvozz]

JMax, I have been looking for that mould to try out. I will take it, PM me and I will PM you.