As te title says: jacketed or cast in the 75 to 85 grain range .313 dia or so. Would also be interested in a mold such as Lyman 311-252 or similar if I can find one... PM please.
As te title says: jacketed or cast in the 75 to 85 grain range .313 dia or so. Would also be interested in a mold such as Lyman 311-252 or similar if I can find one... PM please.
I thank I have some 81 to 82 gr .313 .314 non sized or lubed. Will look pm sent
I should be able to hook you up. PM coming.
I use 62 grain bullets from an accurate mold that I designed to shoot a Pardini 32 ACP bullseye gun. Spent a lot of time experimenting to get them to shoot well. If you are shooting them out of a little handgun I don't know if they will work well for you. Mine are sized to .314 and the cases are expanded to .314 which gives them a little bump in the front. These will shoot around 1 1/2 inch at 50 yards and I only use either 1.5 grains of Tite Group or 1.15 of Titewad which is pretty light. If you want some I will give them to you to try but they are a lot lighter than you asked for. I first tried some 75 grain bullets and they had to be seated too deep and were getting swaged by the case which was ruining accuracy. Also they were .312. Had some 50 yard groups as bad as 12 inches. Tomorrow I will look to see what kinds of 32 molds I still have that throw a heavier bullet at .312
PM sent.
God Bless America
US Army, NRA Patron, TSRA Life
SASS, Ruger & Marlin accumulator
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |