Hei, han on Matti, Canadassa. I took that same Lee mold and shortened it in my lathe by 1 driving band. I put-it in the 4-jaw chuck. you only need to deepen and re-tap the sprue-plate hole. I have a lot of pictures of this on the SAKO Collector's Forum website. It casts about 77 grains now. I do not size them and cast with 6% Antimony they are about 77 grains. I lube with Lee liquid alox. I saw your post on a search and joined this website today but I don't know if I can post pictures.