Hello,
I have the following lot of 30 caliber molds for sale. I am selling as one lot for $135 shipped via Priority Mail with a tracking number. I prefer PayPal for payment. I'll be happy to pay the fees. Post an I'll take it here and PM for my PayPal ID.
The three molds are;
1) Lee 6 cavity aluminum - no handles, just the sprue cutter that comes with the mold. This mold has some wear around the alignment pin hole, but works great.
2) Saeco/Rdding #254 - I have never used it as I don't have handles that fit. I can't comment on its performance. The sprue plate is loose, and I have not bothered to adjust it. It has some extra holes in it I am not familiar with.
3) Lachmiller # 311 130 PM (at least that is what is stamped on the blocks) - this one is mounted on a pair of Lee 2 cavity mold handles I cut off of another mold that was damaged. I put shims in the handles and it sort of works, but there is a little more play than I'd like and feel it could use some further adjustment. I have used this mold one time. The boolits were hard to get out. I think I see some gunk in the cavity that needs to be cleaned or polished out.
Here are photos of the molds. The SAECO mold is the iron mold that is not mounted on the handles, the Lachmiller mold is the iron mold mounted on the handles.
|
   
   
|
|
