Have a couple of moulds that look promising in an old Rem 141 in 35 rem. A Ranch Dog 190gr and the old lyman 358627 215gr SWC.
Plan on shooting deer at 100yds or less (no scope as not D&T for mounts so plan to leave it origional) with the SWC at around 1800fps or the 190 fp at around 1900 fps. Have an HM2 mould that throws a boolit at 235gr that I plan on trying but my MM at that weight is too big on the nose. Might be the same with the HM2 mould
Shot some 190's/215swc yesterday @50yds and my eyes could keep either boolit in under an inch.
Larger meplat or heavier swc design, which would be better? Either WCWW's or ACWW's