Titan ReloadingInline FabricationRotoMetals2Lee Precision
Load DataWidenersSnyders JerkyReloading Everything
MidSouth Shooters Supply Repackbox
Results 1 to 6 of 6

Thread: WTB : Looking for a LEE .309 Roundball mould

  1. 02-16-2021, 10:02 PM #1
    Ohio Rusty
    Ohio Rusty is offline
    Boolit Master Ohio Rusty's Avatar
    Join Date
    Jan 2007
    Location
    Hocking County Ohio
    Posts
    884

    WTB : Looking for a LEE .309 Roundball mould

    Anyone have one of the old Lee .309 roundball moulds ?? Looking to buy the mould or have you cast me about 100 ball from the mould. I can trade wheelweights for .309 roundball.
    Thanks ...
    Ohio Rusty ><>
    "This is America !!, where many have fought and died for our right
    to celebrate our views with inflatable creatures in our yards ......."
  2. 02-17-2021, 10:14 AM #2
    mooman76
    mooman76 is offline
    Boolit Grand Master
    Join Date
    Feb 2006
    Location
    Southern Illinois
    Posts
    6,134
    How picky are you on the size? I should have some, I'll have to check but they probably run more like .310/311. They aren't pure but are soft.
    Aim small, miss small!
  3. 02-17-2021, 07:53 PM #3
    Ohio Rusty
    Ohio Rusty is offline
    Boolit Master Ohio Rusty's Avatar
    Join Date
    Jan 2007
    Location
    Hocking County Ohio
    Posts
    884
    I have some .310's. Lee made a .309 and I was interested in trying the fit with that size. Thanks for the offer though.
    Ohio Rusty ><>
    "This is America !!, where many have fought and died for our right
    to celebrate our views with inflatable creatures in our yards ......."
  4. 02-17-2021, 08:05 PM #4
    Ohio Rusty
    Ohio Rusty is offline
    Boolit Master Ohio Rusty's Avatar
    Join Date
    Jan 2007
    Location
    Hocking County Ohio
    Posts
    884
    Still looking. Lee also made a .308 roundball mould I'd buy if I could find one.
    Last edited by Ohio Rusty; 02-20-2021 at 12:32 PM.
    "This is America !!, where many have fought and died for our right
    to celebrate our views with inflatable creatures in our yards ......."
  5. 02-17-2021, 11:07 PM #5
    midland man
    midland man is offline
    Boolit Bub
    Join Date
    Jun 2018
    Posts
    44
    i could use a .311 mould?
  6. 02-20-2021, 12:33 PM #6
    Ohio Rusty
    Ohio Rusty is offline
    Boolit Master Ohio Rusty's Avatar
    Join Date
    Jan 2007
    Location
    Hocking County Ohio
    Posts
    884
    Saturday bump. Still looking. Lee also made a .308 roundball mould I'd buy if I could find one.
    Ohio Rusty ><>
    "This is America !!, where many have fought and died for our right
    to celebrate our views with inflatable creatures in our yards ......."
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check