I have 10 x 6" Heavy Duty Carding wheels...Brand new...S/S .0025 wire..these are really good..max rpm 1500...They have a nylon center with a 1/4 inch hole and can be drilled any size and are designed to go in a drill press. Do not mount these on a 3500 rpm motor
$225.00 firm and I.ll pay freight to mainland usa
or 5 for $100 you pay freight
cheers
I have tried to put some pics on but no luck..I will try later
Last edited by Theditchman; 02-11-2021 at 08:21 PM.
bump!
I can let them go individually for $25 each delivered
Young man, I don't want to pic nits, but are these rated for 1,500 rpm or the more normal 1,750? If they're packaged it should say.
Also, when you say Heavy Duty, do you mean well built? Or very stiff wires? At .0025 they should be quite soft, is that what they are?
Sorry for all the Qs, but without pics . . .
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
Sir..I agree with no pics it is difficult...I will try again and give more info..I have tried again but It just wont accept the pics..But...They are rated at 1500 RPM but will be fine at 1750 RPM..They are very soft for carding and I use them all the time with great success myself...If you send me a pm with an email address I will send you all pics and measurments
Bristle: 1 3/4" long 1 1/4 " wide
Total Diameter 5 3/4"
I hope this helps
Send me a couple pics please!
My email is on my profile....
AKA: Hoof Hearted
AKA: Buckoff
I will take 1. Thank you.
Anyone that wants some just PM me your email and how many you want and I will send you pics and total USPS Money order is fine...cheers
I will take one. I'll PM you.
Don't feel bad about not being able to load pics. I'm fairly computer literate and I've tried and tried. Used to be able to, but no longer.
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
All 10 are gone now so thanks everyone....I have 10 more that I was going to keep myself but can now get more later if I need them ..so..if anyone wants anymore just drop me a pm
Sorry...Everyone has been sold...maybe I will get more next month..Thanks all
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
