WTB Die Bushing for my Press

[millsa2]

I have a Lyman Old Orange Crusher Press and my Bushing is missing to screw the Reloading Die into. I think it is a 1 1/4'' Bushing Opening which is a 7/8'' -14 Regular die size. If anybody has one they are not needing I will buy it from you to get me going. A lot of people pull these out and use Lee or Hornady Systems. Thanks for your Time.

[JRLesan]

Lee Precison sells them and they don't cost much...

[millsa2]

The Lee Bushing are 1 1/4'' to go with their Quick change Adapters I Think. I cannot find One.

[maxreloader]

CH4D also has many different size bushings to fit any press / die combination possible.

[Texas by God]

I've had this one on the left for decades. I have no idea what press it fits- but the threads are finer than the RCBS bushing. It's yours if you think its what you need.

Sent from my SM-A716U using Tapatalk

[millsa2]

The threads seen to be finer than mine I believe it is a 1 1/4'' 18 tpi Bushing Lyman Orange Chusher

Thanks for the Offer Sir

[j4570]

Ch4d is the place to go. You may could call Lyman to order the part

[millsa2]

Ch4D Shows them Online and I will Order It Tomorrow

Thanks For All The Replies And Help With This Search

[curiousgeorge]

You might check with RCBS for a bushing. My Lyman Orange Crusher has an RCBS Piggyback sitting on it. The bushing that I took out of the Lyman will screw into my Rockchucker with no problem. The only difference between them is the Lyman is 1.280" tall and the RCBS is 1.10" tall.

[millsa2]

Thanks curiousgeorge

[Green Frog]

Is the bushing for the Orange Crusher the same as the one Lyman used for their All American and Comet presses? My AA came without one, so I bought a Comet to get it up and running, Now I have a Comet with a great big hole in it (but I really like my All American with all four holes usable!) Anyway, you've inspired me to get the Comet out of mothballs if I can find the right bushing for it. Of course I really need another press to go online about like I need a third eyeball, but you never can tell when one will quit working.

Froggie

[richhodg66]

If that's the same one I needed to bush the hole in the turret of my Lyman All American (it came with one hole big enough for a 12 gauge die) then good luck finding one, CH4D didn't have it and Lyman doesn't sell parts for those.

I had to have a machinist make one.