So, you have an APP and got the adaptor for NOE bushings?
Then, yeah, that is going to be a PITA for nose sizing.
Indeed it is. I did get enough sized to be able to make up some dummies at least and see if I'm headed in the right direction.
I was able to get dummies of both 30 cal molds to properly chamber in the 30-40. I need to take the 308 down and check it out.
I think I'm on the right track, now I need to cut my tin just a bit more. I'm thinking of using some high antimony lead mixed in. The alloy I am using is soft, soft; I smushed some of them when I lubed them in the lyman.
Evoken:
For my Krag the 314299 worked well sized at .310/11". I had no problem seating to the crimp groove~3.000" COL. My linotype boolets are .305 just behind the ogive.
My Ruger 77 .308W ( Rifling starts ~2.250") also loved the 314299s don't remember the COL, but pretty much at crimp groove as I recall. The Lee 309-200-R boolet is almost as good, and is a bore rider that should work in .308 w/o nose sizing. Another Lee the 312-155-2R works well in the .308 as it has a pointier nose shape than the 312-1602R Which work better in my Krag sized .311".
I've had real good results with 2400, IMR-4198, H322 and RL10x. With higher than "starting" loads.
By "starting" I mean Lyman #3 levels.
I found 18-29 gr 2400, 24-25 gr IMR-4198, ~30 Gr H-322 and RL10x gave me the best accuracy, but I didn't push any higher, yet. There seems to be a step function where the powders really start to burn more consistently and produce higher velocities per grain of powder.
Last edited by Krag 1901; 03-01-2021 at 05:36 AM. Reason: Editied to clarify
Thanks for the tips. I will be trying 2400 with the lee boolit and I think 4198 with the noe one. For starters anyway. For the Krag that is.
I believe that my main problem with the noe mold is my alloy. With lyman 2 it is casting fat noses, no matter how hot i preheat or have the alloy temp at.
Fire lap it and be done with it. Savages have the worst inside finish of all the makers. It will clean up the rest of the barrel while you lap the throat in.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |