ADvertise hereRepackboxInline FabricationMidSouth Shooters Supply
Titan ReloadingRotoMetals2Lee PrecisionReloading UK

Results 1 to 3 of 3

Thread: Auto Ordnance M1 carbine

  1. #1
    Boolit Master
    Join Date
    Apr 2013
    Location
    Northern California
    Posts
    952

    Auto Ordnance M1 carbine

    Howdy neighbors,

    I am about to take possession of a new Auto Ordnance M1 carbine. I bought it from the original owner who never fired it. He says it is a new production from last year.

    I have never cast or reloaded for 30 Carbine ammo so I read through multiple threads and came up with a plan. I bought the Lee C309-120-2R mold and the Lee 311-100-2R mold. I gas checked the 120 grain bullets. I sized both to .309 and lubed them.

    I then loaded a few rounds of each with various powders so I think that I am ready.

    My questions is: All of my reading is based on GI issue M1's. Is there anything unique to the Auto Ordnance rifles that I have to watch for? I know it's not a military rifle but any help is appreciated.

    Thanks in advance for your input.


    Steve in N CA

  2. #2
    Boolit Buddy

    John Wayne's Avatar
    Join Date
    Jun 2012
    Location
    Atlanta Georgia
    Posts
    219
    Well there are men here that will post much more valuable info than mine but, I would have used dead soft lead to slug the throat area, not the whole barrel, and measure that slug before deciding on sizing issues. You may get lucky and find one or both of your choices are good enough but not perfect.
    Want to BUY Springfield M1 .30 Carbine & Hollywood Senior Turret all steel.
    The left hawg weighed 405, right one 315 which had my elderly neighbors grand daughter up a tree and why I got the call. Both charged, one from 20' and the other from 40'. Thanks to the good Lord and Samuel Colt I won. May God bless our Lawmen & Soldiers!

  3. #3
    Boolit Master
    Join Date
    Feb 2007
    Location
    South Western NC
    Posts
    2,834
    My old military M1 Carbine did quite well with Lyman's moderately hard 120 RN GC over 14/H110 and lightly crimped into the proper groove. I sized them to .308 and lubed 'em with the original NRA formula lube, 50/50 Alox and beeswax; they fed and shot very well. I doubt your excellent little Auto-Ordnance rifle's needs would be any different.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check