anyone use these
anyone use these
always.. red dot and unique are staples.. more so of red dot for me personally
Any technology not understood, can seem like Magic!!!
I will love the Lord with all my heart, all my soul, and all my mind.
I use Unique for all my CB rifle loads, from the .243 Win. -> the .45-70 Govt. (not in the same amounts though). I get clean burning, accurate results in all, else I would be looking for another propellant.
Do a search for "the load" or 'Red Dot in rifles".
There are several sights and pages on it.
In school: We learn lessons, and are given tests.
In life: We are given tests, and learn lessons.
OK People. Enough of this idle chit-chat.
This ain't your Grandma's sewing circle.
EVERYONE!
Back to your oars. The Captain wants to waterski.
Green Dot also does well for rifle plinking rounds.
Truthfully, I think most of the so called shotgun/pistol powders will work for most of what I do with cast in rifles.
Robert
12 grains
I Am Descended From Men Who Would Not Be Ruled
Fiat Justitia, Ruat Caelum
Red Dot , Unique and American Select ( Green Dot)
A must have : shoot them all the time for my "low node " rifle shooting
" Associate with men of good quality, if you esteem your own reputation: for it is better to be alone than in bad company. " George Washington
10 grains of Red Dot in 270Win accounted for 2 deer this year. 6-7 grains of Red Dot is a good plain based load in 30-30.
7 grains of Red Dot for a 147 grain 30-30 bullet. 12 grains of Red Dot for a 300 grain .45-70 bullet.
Don
NRA Certified Metallic Cartridge Reloading Instructor
NRA Life Member
I need to replenish my Red Dot supply but still rocking on several pounds of Unique. Both are amongst the Most Useful Powders. I've used Unique in every rifle cartridge I've owned and loaded for except .30 Carbine and 6.5 Remington- but I could have.
Sent from my SM-A716U using Tapatalk
I've burned a lot of Red Dot (or Promo, same by weight), 13 grains at a time in a 30-06 under the Lee 170, gas checked. Shoots as well as I can see and hold.
By rights my avatar should be a can of Red Dot.
I have yet to find a rifle or pistol caliber that it won't work in. However, for semi auto rifles, Red Dot loads may not cycle the action.
IE SKS, You run into max pressure before you get enough gas to cycle regularly.
But turn the gas off and it works fine as a straight pull bolt. And the brass is a lot easier to find.
It does work fine in every pistol caliber carbine I've tried it in. Hipoint carbines in 9mm, .40sw, and .45acp function flawlessly and cycle anything.
I've gone as high as 13 grains in .444marlin and as low as 3 grains in .223 Rem. The vast majority of my rifle loads are in the 4.5-6.5 range.
I truly believe we need to get back to basics.
Get right with the Lord.
Get back to the land.
Get back to thinking like our forefathers thought.
May the Lord bless you and keep you. May the Lord make His face to shine upon you and be gracious unto you
and give you His peace. Let all of the earth – all of His creation – worship and praise His name! Make His
praise glorious!
Unique and Tight Group.
Sent from my SM-N970U using Tapatalk
"Speak softly and carry a big stick; you will go far."
~Theodore Roosevelt~
I use Red Dot/Promo, Green Dot, Unique, and Blue Dot. They worked fine in 30 WCF, 308 Win, 30-06, and 7.92x57mm.
I plan on trying Clay Dot and Longshot in the future.
Sent from my SM-A515U using Tapatalk
US Govt mantra: If it's moving tax it. If it's still moving regulate it. If it stops moving subsidize it
I just bought my first pound of Red Dot , local LGS has both Red and Green on the shelf. Want to try it in .41 Mag and .32 Special with cast.
Yep both work well . I've always found better accuracy by lowering the red dot load a grain or two and upping the Unique load a few grains . IE 10-11 gr red dot and 12-15 grs of Unique with normal weight bullets . In 3030 size cases and larger
If you find yourself in a fair fight, your tactics suck!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |