Greetings all, I thought you might like know my first experiences with the Lee APP. My unit arrived yesterday from MidSouth. Unboxing and setup took about an hour. I was unable to skip reading the instructions as there are enough small parts to cause confusion. Adjustment for case sizing and deprimeing was fairly straight forward. The most annoying item is the drop tube for the cases. Anytime you change caliber this tube needs to be adjusted. It's not hard but it's something I'm going to try and minimize. Once it was setup I was amazed at the speed. It took longer to load the drop tube than to size/deprime the entire stack. I'm currently using the single tube as the larger automatic feeder is on back order. I processed 350 32acp cases in about 20 min. The only issue I had while sizing/depriming is the shell holder would slowly rotate in it's mount. After a bit of rotation it would get out of line enough to cause a jam. Clearing the jam was simple as was recentering the shell holder. It's an issue I'm going to look into tonight. Other than that the press worked perfectly. I'm really looking forward to the APP priming tool.
Thanks,
Stephen