SPF to akajun . Thanks !
WTS a Magma Master Caster. Purchased new about 12 years ago. 110v, works fine. Please review pictures.
Great way to cast bullets. I am out of the business now and do not need it. Was good for small runs and easy to set up.
Comes with one MAGMA mold, buyers choice. Have some spare parts that will go to buyer also.
$1000 plus shipping costs. Pick up near Gettysburg Pa is possible.
Have other MAGMA molds plus RCBS and LYMAN/IDEAL molds converted for use in Magma machines. These will be offered first to buyer of Master Caster, all remaining molds will be sold separately after Master Caster is sold. See pic of list posted.
First unconditional "I'll take it" posted here followed by a PM gets it.
Questions ? Please ask. Have additional pictures if needed. Thanks for looking !
UPDATE EDIT ! 1/5/2021
To answer some questions about machine:
The knob is missing. I might have it, need to find it. As of now you are buying machine without knob. If found it will be included.
Purchased machine brand new. Used it on occasion for short runs of 380-95 RN, some 45 Colt bullets, 45/70-340-RNFP and a few others for about 6 years. Had 3 Bullet Master machines so most work was done on those. Used about once a month, some times twice.
Four years ago we purchased an automated Master Caster and this one was then rarely used.
Last time I used it was to cast about 1,000 45-255-SWC, that mold is in machine now. Worked perfectly.
Had to use rails from it to replace worn rails on the automated machine, purchased new rails from MAGMA and that is what is on it now. So very little wear to rails. Machine was kept lubricated properly.
It comes with orifice for double cavity molds. I do not have single cav orifice.
There are some spares including a cover, a spacer, springs and pins included.
Added a splash guard to top to keep metal away from switch. It is not pictured but will be included.
Machine always worked and was well kept. No drippy !
In about 40 years of bullet casting and loading both personal and commercial I have used the Ballisticast and the Poly Clips machines. The MAGMA is the best.