anyone know of a mold for these?
anyone know of a mold for these?
The only one that comes to mind is the old Lyman 195 gr. .358" mold, but it's a round-nose and may be out of production.
Do you want a full wadcutter, or a SEMI-wadcutter?
You might consult LEE Precision. If you can draw the bullet, they can machine a mold to cast it. It'll cost extra for "custom work", but they're still as reasonable as you're likely to find, anywhere.
I don't really know if they're accepting custom work at the moment with "all of this" going on, but it's easy enough to find out.
For in much wisdom is much grief: and he that increaseth knowledge increaseth sorrow. Ecclesiastes 1:18
He that troubleth his own house shall inherit the wind: and the fool become servant to the wise of heart. Proverbs 11:29
...Verily I say unto you, Inasmuch as ye have done it unto one of the least of my brethren, ye have done it unto me. Matthew 25:40
Carpe SCOTCH!
Contact Tom at Accurate Moulds. I will bet he can make one for you.
He does have a 190 and a 210 and a design at 200 gr. that might work for you
Check out the LASC site for articles by Glenn Fryxell. One of his essays is about the Lyman 358627 (a favorite of mine) semi-wadcutter cast bullets. His article is "A Cast Bullet for all Seasons". Should be right up your alley.
I wonder if you could fly a 358430 200gn. RN backwards for a FWC?
It's a common mould that's been around.
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
Now that 358430 is a design I'd really like to try out! What kind of load data do you like for it? Ive done some 200gr molds in 38, but have been all 200gr rifle boolits loaded a little long OAL, like that of a 357.
If you would be willing to part with one or 2 I could draw them up and I bet Tom @ accurate molds would cut a beautiful mold from it.
I'll be in the shop today and see if I can find my notes on that cast. Will post what I find tonight if I find anything more than what is in the video.
Here's a video I did a year ago on this round when I first got the mould from a friend. I worked up 3 loads but never took it to the maximum...
https://www.youtube.com/watch?v=UK969_kkeIM <200g 38S Jug Busters _ Super Police Load of yesteryear
I ended the video testing it in some water filled milk jugs...it's a penetrator alright.
Now...for a .357M load, I think it may just fit the bill for a deep penetrator and have no doub't whether or not you can get expansion.
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
If anyone is looking for the 200 grn RN Matt's Bullets sells them. I bought a hundred for a project but I got busy doing other things last summer. I experimented with the Accurate 36-200R and got some unstable strikes at 20 yds, out of eight shot Redhawk and GP 100 I think. I again got involved in other stuff before actually testing to confirm. The paper tears wear slightly uneven and not every strike. Perhaps the weight and barrel twist is on ragged edge of stability.
Sent from my SM-G986U using Tapatalk
Ruger RedHawk 357 Mag 44 Mag GP100 Davidson Exclusive 5" Security Six 2 3/4", Speed Six 4"
Smith Wesson 629 PP and 686 PP, 617
I have the Ranch Dog 175 grain TL GC RNFP that drops at 180 grains with WW and has a nice wide meplat. That's good for what I need. I've only loaded them in .357 for rifle and pistol, but might have to try some in my stainless 642. Anyone have a load that might work in a snubbie? GF
Thanks all also Rockrat and 475AR, you had posted whilst I was still writing. Will check in with Tom at accurate, have a few types I am after now.
Magma Engr has a 230 grain flat point where the flat is virtually the full diameter and is listed as a "bowling pin" bullet.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |