Guys, I had a keg of Clay Dot from the last drought, not the current one, but I’m finally down to the last inch or so in my Dillon measure mounted on a Lyman T2 press where I’m reloading .45 Schofield ammo. I have 4 cans of Clays and am wondering what would the harm be in just refilling my measure with some Clays. My current Schofield [for rifle] cowboy load is 5.1 gr of CD with a 200 gr cast rnfp. Thinking that the powders are close enough for cas reloads. Btw, Clays is 9 and CD is 11 on my burn chart. CD was designed as a cheaper version of Clays and can even be used without changing your powder bushing in your shotgun reloader [that is set up for Clays] according to alliant. Any thoughts?