ADvertise hereMidSouth Shooters SupplyLee PrecisionRotoMetals2
Titan ReloadingRepackboxInline Fabrication

Results 1 to 10 of 10

Thread: Weaver KV Scope

  1. #1
    Moderator

    Pressman's Avatar
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    5,112

    Weaver KV Scope

    I am fond of the Weaver K-4 scope, it looks good on a vintage 22 rimfire as well as any older deer rifle, I have several stashed away just waiting for a rifle to be mounted to. Introduced in 1947 it quickly set the standard for a strong and reliable hunting scope. The K-10 came along in 1953 with great for extra reach on that old varmint rifle. It was unfortunate this summer when my only K-10 hiccuped on the Remington .222. It found a new home on a 22 rimfire and seems happy.

    I had heard of some older Weavers, or at least different models of early Weavers but never seen one, that is till yesterday. It's the Model KV. Another 1953 introduction, the KV is a 2.75x5 variable that again was an industry trend setter. I have not determined the exact age of this scope, but I am thinking it's close to 1953, maybe a few years later.

    It has the traditional Weaver steel tube and profile but, unlike today's scopes has a seperate turret for changing the magnification. I have not played with the windage and elevating setting to see if this scope has a centered reticle, some early models did not. The reticle is a post and crosshair that should be good for deer or antelope hunting. Getting a picture of the reticle proved to be a challenge that I have not fully mastered.

    When I acquired it, it was mounted in vintage Leupold rings and bases mounted to a '98 Mauser receiver, Herter's stock and barrel chambered for 6mm Remington.

    I have a vintage 22 rimfire that this nice old Weaver be right at home on. The Mauser will get a period correct Herter's scope.

    Click image for larger version. 

Name:	IMG_9165.jpg 
Views:	44 
Size:	19.1 KB 
ID:	271838

    Click image for larger version. 

Name:	IMG_9168.jpg 
Views:	44 
Size:	32.7 KB 
ID:	271839

    Click image for larger version. 

Name:	IMG_9170.jpg 
Views:	44 
Size:	48.6 KB 
ID:	271840

    Click image for larger version. 

Name:	IMG_9175.jpg 
Views:	44 
Size:	15.5 KB 
ID:	271841
    Antique Reloading Tool Collector, Historian and Writer
    Newsletter editor: Antique Reloading Tool Collectors Association
    Archive manager, Antique Reloading Tool Collectors Association
    email: herters@netins.net
    www.antiquereloadingtools.com

  2. #2
    Boolit Master
    Join Date
    Sep 2018
    Posts
    678
    Iíll take it!
    Where do I send the check?

  3. #3
    Boolit Master
    NoZombies's Avatar
    Join Date
    May 2009
    Location
    N. Florida
    Posts
    2,463
    I really like my old weaver scopes. That reticle is my favorite style for hunting and any kind of shooting where quick acquisition of the sight on target is helpful.
    Nozombies.com Practical Zombie Survival

    Collecting .32 molds. Please let me know if you have one you don't need, cause I might "need" it!

  4. #4
    Boolit Grand Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    10,374
    Nothing looks better on an old steel and walnut rifle than a steel scope in my opinion. Currently I’m down to a 1960’s K10 and a 1970’s K4 as far as Weavers go- but I’m always keeping my eyes open for others. I’ve never seen that particular model that you have- but I like it!

  5. #5
    Boolit Man frogleg's Avatar
    Join Date
    Feb 2011
    Location
    Chimacum, WA.
    Posts
    99
    I had a KV and that same mount on a sporterized 03a3 I bought in the 1970s one of the best shooting combinations I ever had .
    Last edited by frogleg; 11-21-2020 at 07:19 PM. Reason: spelling
    A Boy in a Old Man's Body. I Shoulda Been a Cowboy

  6. #6
    Boolit Master
    Join Date
    Jan 2007
    Location
    Brushy Mountains of NC
    Posts
    864
    Pressman, I looked your scope up in Old Rifle Scopes. States that they were made from 1950 to 1964. I am curious about the variable power adjustments. The early variable power scopes were notorious for changing POI when moved. The adjustments on the KV are not in the eyepiece like later scopes. I would like to see a range report on POA when you change power if you would be kind enough to do so.

    I have a old V9 with an AO, it changes POI. I can zero the scope at 3X, when moved to 9X the POI goes straight up 3 inches. Sort of lucky as it could have been anywhere. One older guy told me years ago to figure out where I wanted it and leave it alone.

    I guess I like them too, probably got close to a dozen. There is a nice K12 in my old Ruger 77V and a B6 on the Savage 25-20. There is V8 with external adjustments somewhere around here. The one I really miss is the T6, needed my but kicked.

    Dave

  7. #7
    Boolit Master Bazoo's Avatar
    Join Date
    Dec 2013
    Location
    Cecilia, Kentucky
    Posts
    4,415
    That is pretty neat, thanks for sharing. The book Old Rifle Scopes is on my want list.

  8. #8
    Moderator

    Pressman's Avatar
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    5,112
    Thanks beemer, I will have to check it out. I have an indoor range this winter so shooting is on going.
    Antique Reloading Tool Collector, Historian and Writer
    Newsletter editor: Antique Reloading Tool Collectors Association
    Archive manager, Antique Reloading Tool Collectors Association
    email: herters@netins.net
    www.antiquereloadingtools.com

  9. #9
    Moderator

    Pressman's Avatar
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    5,112
    Beemer, I tried holding it to a mirror this morning, and yes, increasing the magnification moves the POI straight up.

    Ken
    Antique Reloading Tool Collector, Historian and Writer
    Newsletter editor: Antique Reloading Tool Collectors Association
    Archive manager, Antique Reloading Tool Collectors Association
    email: herters@netins.net
    www.antiquereloadingtools.com

  10. #10
    Boolit Master
    Join Date
    Jan 2007
    Location
    Brushy Mountains of NC
    Posts
    864
    Hope it works out, sometimes nothing looks right but a vintage sight for a vintage rifle.

    Dave

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check