Starting with clip on WW what should I add in order to get reliable expansion from a hollow point in a 32 H&R mag leaving a 6.5" barrel at 1,000-1,100 fps? Thank you.
Starting with clip on WW what should I add in order to get reliable expansion from a hollow point in a 32 H&R mag leaving a 6.5" barrel at 1,000-1,100 fps? Thank you.
In my test with 38 special and 357, the antimony content in coww will cause the nose to break off. If I blended the ww down with pure lead to at least 1% antimony and had the tin at 4/5% I had ok results from 850 to a 1000 fps.
I switched to 20:1 and deep hp's did good starting at 850 up to 950. After 950 I had to use the cup points (shallow hp). Anything over 1000 or so 16:1 and cup points did better.
If I really wanted the classic mushroom without losing weight on impact I would use 16:1 and cup points right around 950 to 1050. I had no leading with any of these. Hope my results are of some use to you.
Tony
Thank you Tony. Great info. Looking forward to trying it very soon.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |