ADvertise hereRotoMetals2RepackboxInline Fabrication
Titan ReloadingMidSouth Shooters SupplyLee Precision

Results 1 to 4 of 4

Thread: Interchangeable Noses, Adjustable Lengths

  1. #1
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    3,644

    Interchangeable Noses, Adjustable Lengths

    Interchangeable noses. Adjustable lengths.

    Why not have pistol / revolver molds with a gas check base and a bore rider ogive bored cylindrically through the bottom of the blocks for interchangeable nose plugs (one handle with a set screw for adjustable length).

    That way you could have SWC's, round noses, wadcutters, cup points...
    Or even a hollow based wadcutter if so desired.
    All adjustable for length.

    That's exactly what I'd like for .411, .431 and .454.

  2. #2
    Boolit Master
    Markopolo's Avatar
    Join Date
    Jul 2017
    Location
    Remote island in SE Alaska
    Posts
    1,950
    actually, there is a 410 mould kinda like that.. interchangeable pins and such to change profile...
    Any technology not understood, can seem like Magic!!!

    I will love the Lord with all my heart, all my soul, and all my mind.

  3. #3
    Boolit Grand Master

    Join Date
    May 2005
    Location
    Castlegar, B.C., Canada
    Posts
    6,834
    There used to be rifle moulds available that way and I think Red River Rick makes adjustable length PP moulds for BP rifles but I can't say that I have heard of them for handgun moulds. Should be quite doable though.

    My push out moulds (like the old Ideal Cylindrical Molds) are made that way but they are not split so make smooth boolits that I usually knurl but depending on diameter they can be paper patched as well. I have several of these I've made for my .303's and my .44 Marlin. They are simple and work well. A split mould with adjustable length nose is a bit harder to make but not a lot. Mihec style Cramer version with nose form or even Lee style HP/HB pin would work... if made to screw up or down.

    I suppose even the old style Lyman HP mould style with nose diameter pin and different positions and shapes would work. That would probably be the easiest and cheapest way to do it for split mould. Accurate could make the mould but you'd have to get someone else to make the nose forms.

    Yes, I often wonder why these things are not readily available. One argument might be that it is difficult to maintain accuracy with a separate nose form due to tolerances and clearances, For absolute best accuracy I'd agree but for most shooting I sure haven't noticed any difference from my moulds in my guns. In fact one my .303's really like a 215 gr. boolit from one of my push out moulds and they shoot that more accurately than boolits from commercial split moulds.

    Longbow

  4. #4
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    3,644
    This is an example of interchangeable plugs supplied by Erik at hollowpointmold.com.



    A Lyman #410610 modified to use adjustable and interchangeable nose plugs would be great for the .41 mag.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check