Hornady 110 RN in 30 Carbine

[denul]

Larry, I’m sorry I had my posting after I put in the picture, but the mold is designated by MP as his 314 -640And my version has the 115 grain weight printed on the side of the mold as well. I also have a 100 gr version

[denul]

These reloads were made without having to change any settings on the dies whatsoever between factory full metal jacket or the 314 - 640.

[35 Whelen]

Larry, I’m sorry I had my posting after I put in the picture, but the mold is designated by MP as his 314 -640And my version has the 115 grain weight printed on the side of the mold as well. I also have a 100 gr version

I appreciate you posting those pictures. What diameter are you getting with that mold?

35W

[denul]

.314;And a bit more after they have been powder coated. I resize them to.309 in the star lubrsizer,Using just a bit of case, lube.They are not distorted, and the crimp groove remains in place.I generally take them down to 312 or 313 for using in the 32 H&R magnum or the 327 bedroom. I haven’t done as much with the 100 grain version, but it really does very nicely as well in both the 30 M1 carbine,and in the 30 Carbine Blackhawk.All in all, a very versatile mold if you happen to be into 32/20, anything in 32 from short or long,to 32 H&R and 327,and to 30 carbine.



.