I have been trying out my new Lee Classic Turret press. It differs from most other presses in that the turret rides in a separate assembly from the ram. While loading 9mm I had some instances where the case mouth hit the side of the flaring mandrel and was damaged. I had to loosen the three bolts that mount the turret to the ram base and realign it. Seems to have worked so far. I feed it hand primed cases so it is only flaring and charging the case, seating the boolit and then crimping. The Auto Disk powder measure works well with the press. I have three turrets, one each for 9mm, .38 and .44. I will load some .44 special today. I like that it can be used to seat and crimp in separate steps.